Generating wall-bounded turbulent inflows at high Reynolds numbers
Journal of Fluid Mechanics · 25.06.2026 · 1037
DOI: 10.1017/jfm.2026.11689 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 22.06.2026. Verfasst von Ronith Stanly und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European High Performance Computing Joint Undertaking.
Abstract (Originalsprache)
One of the main challenges in simulating high Reynolds number ( italic Re Re ${\textit{Re}}$ ) turbulent boundary layers (TBLs) is the long streamwise distance required for large-scale outer-layer structures to develop, making such simulations prohibitively expensive. We propose an inflow generation method for high italic Re Re ${\textit{Re}}$ wall turbulence that leverages the known structure and scaling laws of TBLs. Pre-multiplied spectra of streamwise velocity show that with an increase in italic Re Re ${\textit{Re}}$ the outer region grows and occupies more of the spanwise wavenumber space in proportion to the increase in italic Re Re ${\textit{Re}}$ , while the inner region remains approximately the same. Exploiting this behaviour, we generate inflow conditions for a target italic Re Re ${\textit{Re}}$ by starting from cross-stream velocity slices at a lower base italic Re Re ${\textit{Re}}$ . In spectral space, we identify the inner- and outer-region wavenumbers, and shift the outer-region components proportionally to the desired italic Re Re ${\textit{Re}}$ increase. We examine the capability of this method by scaling velocity slices at italic Re Subscript theta Baseline equals 2240 Re θ = 2240 ${\textit{Re}}_\theta =2240$ and 4430 to italic Re Subscript theta Baseline equals 8000 Re θ = 8000 ${\textit{Re}}_\theta =8000$ , and using them as inflow conditions for direct numerical simulations of TBLs growing in the range italic Re Subscript theta Baseline equals 8000 minus 9000 Re θ = 8000 − 9000 $ {\textit{Re}}_\theta =8000-9000$ , with italic Re Subscript theta Re θ ${\textit{Re}}_\theta$ being the Reynolds number based on the momentum-loss thickness theta θ $\theta$ . The predicted skin friction coefficient and shape factor, regardless of the base italic Re Subscript theta Re θ $ {\textit{Re}}_\theta$ tested, lie within plus or minus 3.5 percent sign ± 3.5 % $\pm 3.5\,\%$ and plus or minus 0.5 percent sign ± 0.5 % $\pm 0.5\,\%$ , respectively, of that of a precursor simulation right from the inlet. Reynolds stresses match very well after approximately 8 delta Subscript 99 Sub Subscript 0 8 δ 99 0 $8\,\delta _{99_0}$ . The development length in terms of the Reynolds stresses is approximately 8 delta Subscript 99 Sub Subscript 0 8 δ 99 0 $8\delta _{99_0}$ , where delta Subscript 99 Sub Subscript 0 δ 99 0 $\delta _{99_0}$ is the boundary layer thickness at the inlet. This gives an order of magnitude reduction in development length compared with other methods proposed in the literature.
Förderung
- European High Performance Computing Joint Undertaking
Zitieren
APA
Stanly, R., Mukha, T., Karp, M., Markidis, S., & Schlatter, P. (2026). Generating wall-bounded turbulent inflows at high Reynolds numbers. Journal of Fluid Mechanics, 1037. https://doi.org/10.1017/jfm.2026.11689
Vancouver
Stanly R, Mukha T, Karp M, Markidis S, Schlatter P. Generating wall-bounded turbulent inflows at high Reynolds numbers. Journal of Fluid Mechanics. 2026;1037. doi:10.1017/jfm.2026.11689
BibTeX
@article{Stanly2026,
author = {Stanly, Ronith and Mukha, Timofey and Karp, Martin and Markidis, Stefano and Schlatter, Philipp},
title = {Generating wall-bounded turbulent inflows at high Reynolds numbers},
journal = {Journal of Fluid Mechanics},
year = {2026},
volume = {1037},
doi = {10.1017/jfm.2026.11689}
}
EUVIMED