EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic plugging of a plane-strain hydraulic fracture driven by slurry flow

Shaoyi Cheng, Bisheng Wu, Xi Zhang, Herbert E. Huppert, Robert G. Jeffrey

Journal of Fluid Mechanics · 10.05.2025 · 1010

DOI: 10.1017/jfm.2025.262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 15.05.2025. Verfasst von Shaoyi Cheng und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plugging of a hydraulic fracture because of particle bridging in the fracture channel is ubiquitous in drilling operations and reservoir stimulations. The particles transported in the fluid and fracture can aggregate under certain conditions and finally form a plug. The plug reduces the permeability of the flow channel and blocks the fluid pressure from reaching the fracture front, leading to fracture arrest. In this paper, a numerical model is developed to describe the plugging process of a hydraulic fracture driven by a slurry of solid particles in a viscous fluid while accounting for the rock deformation, slurry flow in the fracture channel, fracture propagation, particle transport and bridging. Three dimensionless numbers are derived from the governing equations, which reveal two length scales that control the fracture propagation and particle transport behaviour, respectively. The difference in magnitude between the two length scales implies three limiting regimes for fracture propagation, i.e. static regime, fluid-driven regime and slurry-driven regime, which correspond to fracture arrest, fracture driven by clean fluid, and fracture driven by slurry, respectively. Numerical results show that the fracture will sequentially transition through the static regime, fluid-driven regime and slurry-driven regime as the fracture length increases. The transition between regimes is controlled by the ratio between the two length scales. Simulation results also reveal two plugging modes, with the plug located near the fracture tip region and at the fracture inlet. The transition between the two plugging modes is controlled by the ratio of the length scales and the injected particle concentration.

Zitieren

APA

Cheng, S., Wu, B., Zhang, X., Huppert, H. E., & Jeffrey, R. G. (2025). Dynamic plugging of a plane-strain hydraulic fracture driven by slurry flow. Journal of Fluid Mechanics, 1010. https://doi.org/10.1017/jfm.2025.262

Vancouver

Cheng S, Wu B, Zhang X, Huppert HE, Jeffrey RG. Dynamic plugging of a plane-strain hydraulic fracture driven by slurry flow. Journal of Fluid Mechanics. 2025;1010. doi:10.1017/jfm.2025.262

BibTeX
@article{Cheng2025,
  author = {Cheng, Shaoyi and Wu, Bisheng and Zhang, Xi and Huppert, Herbert E. and Jeffrey, Robert G.},
  title = {Dynamic plugging of a plane-strain hydraulic fracture driven by slurry flow},
  journal = {Journal of Fluid Mechanics},
  year = {2025},
  volume = {1010},
  doi = {10.1017/jfm.2025.262}
}
Kostenlos starten →