EUVIMEDEUVIMED entdecken
Crossref

Staggered versus aligned: how wavy wall topology governs hypersonic boundary layer transition

Zepeng Yang, Zhenxun Gao, Xinliang Guo, Yuhan Wang

Journal of Fluid Mechanics · 10.04.2026 · 1032

DOI: 10.1017/jfm.2025.11062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 30.03.2026. Verfasst von Zepeng Yang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 71 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the transition processes induced by three-dimensional wavy wall roughnesses with two different distribution topologies (staggered type-S and aligned type-A) are studied at Mach 5.92 by direct numerical simulations. For the first time, the effects of the two distribution topologies on transition are investigated. It is found that the type-S roughness can induce transition significantly earlier – about 34.5 % earlier than that of the type-A roughness under the conditions in this paper. Both the type-S and type-A roughnesses can induce counter-rotating pairs of streamwise vortices. A ‘staggered-enhancing’ mechanism for the vortices is discovered in the type-S roughness, which results in significantly stronger vortices than in the type-A case. The enhanced vortices in turn produce stronger shear layers, which is the key factor leading to the stronger transition-induced ability of the type-S roughness. Then, based on the spectral proper orthogonal decomposition, the linear and nonlinear instability characteristics of the two roughnesses are investigated. For type-S roughness, its downstream linear instability is dominated by the low-frequency shear layer instability near 50 kHz. Once the linear fluctuation amplitude saturates, the nonlinear breakdown is triggered from the shear layer. For type-A roughness, its downstream linear instability is co-dominated by two modes: the low-frequency shear layer instability near 23 kHz, and the high-frequency Mack’s second mode above 100 kHz. Both modes exhibit significantly lower growth rates than the dominant shear layer instability in the type-S case, ultimately delaying the transition onset compared to type-S roughness.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, Z., Gao, Z., Guo, X., & Wang, Y. (2026). Staggered versus aligned: how wavy wall topology governs hypersonic boundary layer transition. Journal of Fluid Mechanics, 1032. https://doi.org/10.1017/jfm.2025.11062

Vancouver

Yang Z, Gao Z, Guo X, Wang Y. Staggered versus aligned: how wavy wall topology governs hypersonic boundary layer transition. Journal of Fluid Mechanics. 2026;1032. doi:10.1017/jfm.2025.11062

BibTeX
@article{Yang2026,
  author = {Yang, Zepeng and Gao, Zhenxun and Guo, Xinliang and Wang, Yuhan},
  title = {Staggered versus aligned: how wavy wall topology governs hypersonic boundary layer transition},
  journal = {Journal of Fluid Mechanics},
  year = {2026},
  volume = {1032},
  doi = {10.1017/jfm.2025.11062}
}
Kostenlos starten →