EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transient Joule–Thomson cooling during CO 2 injection in depleted reservoirs

Lucy E.L. Tweed, Michael J. Bickle, Jerome A. Neufeld

Journal of Fluid Mechanics · 25.10.2024 · 997

DOI: 10.1017/jfm.2024.845 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 10.10.2024. Verfasst von Lucy E.L. Tweed und 2 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The injection of ${\rm CO}_2$ into depleted reservoirs carries the potential for significant Joule–Thomson cooling, when dense, supercritical ${\rm CO}_2$ is injected into a strongly under-pressured reservoir. The resulting low temperatures around the wellbore risk causing thermal fracturing of the well/near-well region or causing freezing of pore waters or formation of gas hydrates which would reduce injectivity and jeopardise well and reservoir integrity. These risks are particularly acute during injection start-up when ${\rm CO}_2$ is in the gas stability field. In this paper we present a model of non-isothermal single-phase flow in the near-wellbore region. We show that during radial injection, with fixed mass injection rate, transient Joule–Thomson cooling can be described by similarity solutions at early times. The positions of the ${\rm CO}_2$ and thermal fronts are described by self-similar scaling relations. We show that, in contrast to steady-state flow, transient flow causes slight heating of ${\rm CO}_2$ and reservoir gas either side of the thermal front, as pressure diffuses into the reservoir. The scaling analysis here identifies the parametric dependence of Joule–Thomson cooling. We present a sensitivity analysis which demonstrates that the primary controls on the degree of cooling are reservoir permeability, reservoir thickness, injection rate and Joule–Thomson coefficient. The analysis presented provides a computationally efficient approach for assessing the degree of Joule–Thomson cooling expected during injection start-up, providing a complement to complex, fully resolved numerical simulations.

Zitieren

APA

Tweed, L. E., Bickle, M. J., & Neufeld, J. A. (2024). Transient Joule–Thomson cooling during CO 2 injection in depleted reservoirs. Journal of Fluid Mechanics, 997. https://doi.org/10.1017/jfm.2024.845

Vancouver

Tweed LE, Bickle MJ, Neufeld JA. Transient Joule–Thomson cooling during CO 2 injection in depleted reservoirs. Journal of Fluid Mechanics. 2024;997. doi:10.1017/jfm.2024.845

BibTeX
@article{Tweed2024,
  author = {Tweed, Lucy E.L. and Bickle, Michael J. and Neufeld, Jerome A.},
  title = {Transient Joule–Thomson cooling during CO 2 injection in depleted reservoirs},
  journal = {Journal of Fluid Mechanics},
  year = {2024},
  volume = {997},
  doi = {10.1017/jfm.2024.845}
}
Kostenlos starten →