Effects of dilatation and turbulence on tangential strain rates in premixed hydrogen and iso-octane flames
Journal of Fluid Mechanics · 25.02.2024 · 981
DOI: 10.1017/jfm.2024.14 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 15.02.2024. Verfasst von Hongchao Chu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Research Council, Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
The tangential strain rate in premixed flames impacts significantly the flame surface area generation and thus the combustion process. Studies on incompressible isotropic turbulence have revealed that the mean tangential strain rate at material and iso-scalar surfaces is positive and exhibits a universal value when normalized by the Kolmogorov time. This is associated with the preferential alignment of the surface normal with the most compressive principal strain rate. The present study investigates such effects in premixed hydrogen and iso-octane flame kernels using direct numerical simulations. It is shown that the normalized mean tangential strain rate of the investigated flames has a very similar value compared with the incompressible flows. However, in the reaction zone, the flame surface normal aligns preferentially with the most extensive principal strain rate. Furthermore, this alignment depends on the reaction progress variable and the Lewis number, while the tangential strain rate remains independent of these parameters. Such counter-intuitive behaviour is systematically investigated by decomposing the effects of dilatation and residual solenoidal turbulence. It is found that the solenoidal turbulence influences significantly the tangential strain rate. A general effect of turbulence on the tangential strain rate is identified, which is consistent with incompressible flows and independent of the Lewis number and the reaction progress variable. This is a remarkable finding indicating that models of the tangential strain rate developed based on incompressible flows apply also to premixed flames with different Lewis numbers, and, for the modelling, only the solenoidal turbulence should be considered.
Förderung
- European Research Council
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Chu, H., Berger, L., Gauding, M., Attili, A., & Pitsch, H. (2024). Effects of dilatation and turbulence on tangential strain rates in premixed hydrogen and iso-octane flames. Journal of Fluid Mechanics, 981. https://doi.org/10.1017/jfm.2024.14
Vancouver
Chu H, Berger L, Gauding M, Attili A, Pitsch H. Effects of dilatation and turbulence on tangential strain rates in premixed hydrogen and iso-octane flames. Journal of Fluid Mechanics. 2024;981. doi:10.1017/jfm.2024.14
BibTeX
@article{Chu2024,
author = {Chu, Hongchao and Berger, Lukas and Gauding, Michael and Attili, Antonio and Pitsch, Heinz},
title = {Effects of dilatation and turbulence on tangential strain rates in premixed hydrogen and iso-octane flames},
journal = {Journal of Fluid Mechanics},
year = {2024},
volume = {981},
doi = {10.1017/jfm.2024.14}
}
EUVIMED