Adjoint-based linear sensitivity of a supersonic boundary layer to steady wall blowing–suction/heating–cooling
Journal of Fluid Mechanics · 10.01.2024 · 978
DOI: 10.1017/jfm.2023.993 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 05.01.2024. Verfasst von Arthur Poulain und 4 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: European Office of Aerospace Research and Development.
Abstract (Originalsprache)
For a Mach $4.5$ flat-plate adiabatic boundary layer, we study the sensitivity of the first, second Mack modes and streaks to steady wall-normal blowing/suction and wall heat flux. The global instabilities are characterised in frequency space with resolvent gains and their gradients with respect to wall-boundary conditions are derived through a Lagrangian-based method. The implementation is performed in the open-source high-order finite-volume code BROADCAST and algorithmic differentiation is used to access the high-order state derivatives of the discretised governing equations. For the second Mack mode, the resolvent optimal gain decreases when suction is applied upstream of Fedorov's mode $S$ /mode $F$ synchronisation point, leading to stabilisation, and the converse when applied downstream. The largest suction gradient is in the region of branch I of mode $S$ neutral curve. For heat-flux control, strong heating at the leading edge stabilises both the first and second Mack modes, the former being more sensitive to wall-temperature control. Streaks are less sensitive to any boundary control in comparison with the Mack modes. Eventually, we show that an optimal actuator consisting of a single steady heating strip located close to the leading edge manages to damp the linear growth of all three instability mechanisms.
Förderung
- European Office of Aerospace Research and Development
Zitieren
APA
Poulain, A., Content, C., Rigas, G., Garnier, E., & Sipp, D. (2024). Adjoint-based linear sensitivity of a supersonic boundary layer to steady wall blowing–suction/heating–cooling. Journal of Fluid Mechanics, 978. https://doi.org/10.1017/jfm.2023.993
Vancouver
Poulain A, Content C, Rigas G, Garnier E, Sipp D. Adjoint-based linear sensitivity of a supersonic boundary layer to steady wall blowing–suction/heating–cooling. Journal of Fluid Mechanics. 2024;978. doi:10.1017/jfm.2023.993
BibTeX
@article{Poulain2024,
author = {Poulain, Arthur and Content, Cédric and Rigas, Georgios and Garnier, Eric and Sipp, Denis},
title = {Adjoint-based linear sensitivity of a supersonic boundary layer to steady wall blowing–suction/heating–cooling},
journal = {Journal of Fluid Mechanics},
year = {2024},
volume = {978},
doi = {10.1017/jfm.2023.993}
}
EUVIMED