EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Shape effect on solid melting in flowing liquid

Rui Yang, Christopher J. Howland, Hao-Ran Liu, Roberto Verzicco, Detlef Lohse

Journal of Fluid Mechanics · 10.02.2024 · 980

DOI: 10.1017/jfm.2023.1080 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 26.01.2024. Verfasst von Rui Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Iceberg melting is a critical factor for climate change. However, the shape of an iceberg is an often neglected aspect of its melting process. Our study investigates the influence of different ice shapes and ambient flow velocities on melt rates by conducting direct numerical simulations of a simplified system of bluff body flow. Our study focuses on the ellipsoidal shape, with the aspect ratio as the control parameter. We found the shape plays a crucial role in the melting process, resulting in significant variations in the melt rate between different shapes. Without flow, the optimal shape for a minimal melt rate is the disk (two-dimensional) or sphere (three-dimensional), due to the minimal surface area. However, as the ambient flow velocity increases, the optimal shape changes with the aspect ratio. We find that ice with an elliptical shape (when the long axis is aligned with the flow direction) can melt up to 10 % slower than a circular shape when exposed to flowing water. Following the approach considered by Huang et al. ( J. Fluid Mech. , vol. 765, 2015, R3) for dissolving bodies, we provide a quantitative theoretical explanation for this optimal shape, based on the combined contributions from both surface-area effects and convective-heat-transfer effects. Our findings provide insight into the interplay between phase transitions and ambient flows, contributing to our understanding of the iceberg melting process and highlighting the need to consider the aspect-ratio effect in estimates of iceberg melt rates.

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Yang, R., Howland, C. J., Liu, H., Verzicco, R., & Lohse, D. (2024). Shape effect on solid melting in flowing liquid. Journal of Fluid Mechanics, 980. https://doi.org/10.1017/jfm.2023.1080

Vancouver

Yang R, Howland CJ, Liu H, Verzicco R, Lohse D. Shape effect on solid melting in flowing liquid. Journal of Fluid Mechanics. 2024;980. doi:10.1017/jfm.2023.1080

BibTeX
@article{Yang2024,
  author = {Yang, Rui and Howland, Christopher J. and Liu, Hao-Ran and Verzicco, Roberto and Lohse, Detlef},
  title = {Shape effect on solid melting in flowing liquid},
  journal = {Journal of Fluid Mechanics},
  year = {2024},
  volume = {980},
  doi = {10.1017/jfm.2023.1080}
}
Kostenlos starten →