Brightness-guided adiabatic phase-mismatch engineering for high-power, temperature-robust picosecond green generation in lithium triborate
High Power Laser Science and Engineering · 2026 · 14
DOI: 10.1017/hpl.2026.10193 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Power Laser Science and Engineering, online erschienen am 31.07.2026. Verfasst von Mingheng Yuan und 10 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
High-brightness picosecond green lasers are important for precision processing and advanced manufacturing, yet lithium triborate (LBO)-based picosecond second-harmonic generation often faces a trade-off between brightness and temperature bandwidth. Here we treat the longitudinal phase-mismatch trajectory as a design degree of freedom and propose a brightness-oriented adiabatic trajectory that jointly optimizes conversion efficiency and beam quality. Through parametric trajectory screening and longitudinal temperature-profile mapping, the proposed trajectory was implemented in a 50-mm-long LBO crystal. Experiments produced 79.87 W of picosecond green output at 532.286 nm, corresponding to a light-to-light conversion efficiency of 62.4%, with a beam quality factor of M 2 = 1.24 ${M}^2=1.24$ upper M squared equals 1.24 . Compared with a conventional efficiency-oriented adiabatic trajectory, the proposed trajectory increased brightness by suppressing beam quality degradation rather than maximizing conversion efficiency alone. We further introduce the brightness temperature bandwidth, which reached 25°C for the proposed trajectory, 39% larger than the 18°C value obtained with the conventional trajectory, but smaller than the corresponding efficiency temperature bandwidth of 34°C. This difference indicates that an efficiency-defined bandwidth can overestimate the practically usable operating range.
Zitieren
APA
Yuan, M., Li, F., Liu, J., Bai, Z., Zheng, Y., Rao, D., Zhao, X., Sui, Z., Cui, Y., Gao, Y., & Fan, Z. (2026). Brightness-guided adiabatic phase-mismatch engineering for high-power, temperature-robust picosecond green generation in lithium triborate. High Power Laser Science and Engineering, 14. https://doi.org/10.1017/hpl.2026.10193
Vancouver
Yuan M, Li F, Liu J, Bai Z, Zheng Y, Rao D, et al. Brightness-guided adiabatic phase-mismatch engineering for high-power, temperature-robust picosecond green generation in lithium triborate. High Power Laser Science and Engineering. 2026;14. doi:10.1017/hpl.2026.10193
BibTeX
@article{Yuan2026,
author = {Yuan, Mingheng and Li, Fujian and Liu, Jinsheng and Bai, Zhenao and Zheng, Ye and Rao, Daxing and Zhao, Xiaohui and Sui, Zhan and Cui, Yong and Gao, Yanqi and Fan, Zhongwei},
title = {Brightness-guided adiabatic phase-mismatch engineering for high-power, temperature-robust picosecond green generation in lithium triborate},
journal = {High Power Laser Science and Engineering},
year = {2026},
volume = {14},
doi = {10.1017/hpl.2026.10193}
}
EUVIMED