EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of blended wing body and tube-and-wing performance characteristics

J. Ahuja, C. Perron, R. D. Bermudez Rivera, J. C. Tai, D. N. Mavris

The Aeronautical Journal · 2025-07 · 129 (1337) · 1764-1790

DOI: 10.1017/aer.2025.8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Aeronautical Journal, online erschienen am 19.03.2025. Verfasst von J. Ahuja und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper quantifies the impacts of the airframe configuration change on the performance differences between a tube-and-wing and a blended wing body aircraft. Both are sized for a 5,000 nmi design range carrying 225 passengers, initially using the same engine. Parametric geometry is created for both concepts based on relevant public information. The tube-and-wing notional geometry is derived from the existing Boeing 767-300ER, whereas JetZero’s concept inspires the blended wing body. These geometries are optimised using computational fluid dynamics and gradient-free approaches. Drag polars for each optimised model, spanning the expected operating envelope, are generated using computational fluid dynamics simulations and multi-fidelity surrogate models. Mission analysis is performed for the blended wing body, a conventional tube-and wing variant with metallic structures, and an advanced tube-and-wing with composite structures. The results show that the blended wing body operates with 15-20% higher lift-over-drag during the cruise, 24% lower fuel burn for the design mission, and 15% reduction in ramp weight relative to the conventional tube-and-wing. These differences drop to 20% for the design mission fuel burn and 10% for the ramp weight relative to the advanced tube-and-wing. When the engines are re-sized and optimised separately for each configuration, the blended wing body demonstrates a 25% improvement in block fuel and 16% reduction in ramp weight relative to the conventional tube-and-wing, which decreases to 21% and 10% relative to the advanced tube-and-wing. In both comparisons, the fuel efficiency advantage of the blended wing body decreases as the mission range is reduced.

Zitieren

APA

Ahuja, J., Perron, C., Rivera, R. D. B., Tai, J. C., & Mavris, D. N. (2025). Comparison of blended wing body and tube-and-wing performance characteristics. The Aeronautical Journal, 129(1337), 1764-1790. https://doi.org/10.1017/aer.2025.8

Vancouver

Ahuja J, Perron C, Rivera RDB, Tai JC, Mavris DN. Comparison of blended wing body and tube-and-wing performance characteristics. The Aeronautical Journal. 2025;129(1337):1764-1790. doi:10.1017/aer.2025.8

BibTeX
@article{Ahuja2025,
  author = {Ahuja, J. and Perron, C. and Rivera, R. D. Bermudez and Tai, J. C. and Mavris, D. N.},
  title = {Comparison of blended wing body and tube-and-wing performance characteristics},
  journal = {The Aeronautical Journal},
  year = {2025},
  volume = {129},
  number = {1337},
  pages = {1764--1790},
  doi = {10.1017/aer.2025.8}
}
Kostenlos starten →