Protocol for 3D and 4D printing of highly conductive metallic composite using liquid metal gels
STAR Protocols · 2024
DOI: 10.1016/j.xpro.2023.102813 ↗Kurz gefasst
Studienprotokoll in der Zeitschrift STAR Protocols, 2024. Verfasst von Ruizhe Xing und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, P.R. China; Department of Chemical and Bi…. Hauptthemen laut MEDLINE: Copper, Water. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 4 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: China Scholarship Council, Division of Civil, Mechanical and Manufacturing Innovation, National Natural Science Foundation of China.
Abstract (Originalsprache)
3D or 4D printing of metal structures requires extreme conditions or a multistage process. Here, we present a protocol for the preparation of highly conductive metallic composites using liquid metal gels at ambient conditions. We describe the steps to prepare ternary gels composed of copper particles, liquid metal, and water. We then detail procedures for 3D or 4D printing gels into highly conductive structures after adding a small amount of rheological modifier (methyl cellulose) using direct ink writing techniques. For complete details on the use and execution of this protocol, please refer to Xing et al. (2023).1.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, P.R. China; Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 2…
- School of Marine Science and Technology, Tianjin University, Tianjin 300072, P.R. China.
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, P.R. China.
- School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, P.R. China.
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA. Electronic address: mddickey@ncsu.edu.
Förderung
- China Scholarship Council
- Division of Civil, Mechanical and Manufacturing Innovation
- National Natural Science Foundation of China
Zitieren
APA
Xing, R., Huang, R., Qi, W., Kong, J., & Dickey, M. D. (2024). Protocol for 3D and 4D printing of highly conductive metallic composite using liquid metal gels. STAR Protocols. https://doi.org/10.1016/j.xpro.2023.102813
Vancouver
Xing R, Huang R, Qi W, Kong J, Dickey MD. Protocol for 3D and 4D printing of highly conductive metallic composite using liquid metal gels. STAR Protocols. 2024. doi:10.1016/j.xpro.2023.102813
BibTeX
@article{Xing2024,
author = {Xing, Ruizhe and Huang, Renliang and Qi, Wei and Kong, Jie and Dickey, Michael D},
title = {Protocol for 3D and 4D printing of highly conductive metallic composite using liquid metal gels},
journal = {STAR Protocols},
year = {2024},
doi = {10.1016/j.xpro.2023.102813}
}
EUVIMED