Disposal of waste printed circuit boards in molten carbonates for valorization and metal recovery
Waste Management · 2026-07 · 222 · 115682
DOI: 10.1016/j.wasman.2026.115682 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2026-07. Verfasst von Zihan Zhao und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, School of Metallurgical and Energy Engineering, Kunming University of S…. Hauptthemen laut MEDLINE: Electronic Waste, Metals, Carbonates, Recycling. Die Arbeit nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Applied Basic Research Foundation of Yunnan Province.
Abstract (Originalsprache)
The disposal of waste printed circuit boards (WPCBs) suffers from low separation efficiency, high recovery cost and environmental pollution due to the complex components. To address these issues, we proposed to dispose WPCBs in molten carbonates for the valorization of carbonaceous species and the metal enrichment and recovery. The pyrolysis behavior of WPCBs was investigated within the temperature range of 500-800 °C in a molten-carbonates reactor equipped with a mass spectra and gas chromatograph. Compared to the pyrolysis without molten carbonates, the process achieved a complete pyrolysis of WPCBs and shifted the main liquid product from phenols to methyl undecylenate with a high selectivity of 49.8 % at 600 °C. Cu and Au showed nearly complete apparent recovery in the collected de-salted solid residue. Mechanistically, the molten carbonates served as an efficient medium for heat transfer and catalysis, facilitating the deep de-encapsulation of metals from the organic matrix and improving Pb retention in the collected solid residue at 600 °C. In addition, a steady-state process model was developed using Aspen Plus to simulate the industrial application. A preliminary simulation-based techno-economic assessment suggested potential economic feasibility under the stated assumptions, with an estimated payback period of approximately 2 years and a 20-year net benefit of approximately CNY 250 million. These findings suggest that the proposed process offers a sustainable and economically viable pathway for full-component resource recovery.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, School of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan, China; Yunnan Key Labor…
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Applied Basic Research Foundation of Yunnan Province
- Key Technologies Research and Development Program
Zitieren
APA
Zhao, Z., Lin, M., & Zhu, X. (2026). Disposal of waste printed circuit boards in molten carbonates for valorization and metal recovery. Waste Management, 222, 115682. https://doi.org/10.1016/j.wasman.2026.115682
Vancouver
Zhao Z, Lin M, Zhu X. Disposal of waste printed circuit boards in molten carbonates for valorization and metal recovery. Waste Management. 2026;222:115682. doi:10.1016/j.wasman.2026.115682
BibTeX
@article{Zhao2026,
author = {Zhao, Zihan and Lin, Min and Zhu, Xing},
title = {Disposal of waste printed circuit boards in molten carbonates for valorization and metal recovery},
journal = {Waste Management},
year = {2026},
volume = {222},
pages = {115682},
doi = {10.1016/j.wasman.2026.115682}
}
EUVIMED