Reaction performance of Non-Thermal plasma induced CO2 reforming of CH4 for landfill gas treatment
Waste Management · 2025-06 · 200 · 114751
DOI: 10.1016/j.wasman.2025.114751 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2025-06. Verfasst von Yiping Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Key Laboratory of Emission Surveillance and Control for Thermal Power Generation, North China Electric Power University, Beijing 102206, Chin…. Hauptthemen laut MEDLINE: Methane, Carbon Dioxide, Waste Disposal Facilities, Air Pollutants. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: Project 211, Australian Research Council, National Natural Science Foundation of China.
Abstract (Originalsprache)
Non-thermal plasma induced reforming of landfill gas into syngas is an attractive alternative approach to resource recovery from small-scale and variable landfill gas streams. The reaction performance, as indicated by reactant conversion, product yield, and reaction energy intensity, of non-thermal plasma-induced CO2 reforming of CH4 has been systematically investigated in a coaxial cylindrical dielectric barrier discharge (DBD) reactor. The reactor surface temperature distribution under varying process parameters is incorporated to investigate its impact on discharge and plasma chemical reaction. It is shown that either an increase in the DBD input power or a reduction in the inlet flow rate leads to greater CH4 and CO2 conversions and syngas yield. A higher CO2 to CH4 molar ratio improves CH4 conversion and syngas yield and reduces the generation of C2 and C3 hydrocarbons. The CH4 and CO2 conversions and H2 and CO yields reached their maximum values of 44.5 %, 27.4 %, 17.1 %, and 20.2 %, respectively, in this experiment. The O∙ radicals generated during CO2 splitting are crucial in enhancing CH4 reforming. The reaction energy intensity, defined as the ratio of the enthalpy change of the desired reactions to the DBD plasma discharge energy, increases effectively with increasing CO2/CH4 molar ratio. The response surface methodology (RSM) is employed to explore the interactions among the three key parameters, and the response surface optimization identified optimal conditions of 80 W input power, 80 ml/min inlet flow rate, and a CH4/CO2 molar ratio of 1.0:2.5, achieving a reaction energy intensity of 19.3 %.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Beijing Key Laboratory of Emission Surveillance and Control for Thermal Power Generation, North China Electric Power University, Beijing 102206, China; Key Laboratory of Power Station Energy Transfer Conversion and Syst…
- School of Chemical Engineering, University of Science and Technology Liaoning, Anshan 114051, China.
- Centre for Energy (M473), The University of Western Australia, 35 Stirling Highway, Crawley, WA 6009, Australia.
Förderung
- Project 211
- Australian Research Council
- National Natural Science Foundation of China
Zitieren
APA
Sun, Y., Zhang, K., Qi, N., Chao, C., Li, X., & Zhang, D. (2025). Reaction performance of Non-Thermal plasma induced CO2 reforming of CH4 for landfill gas treatment. Waste Management, 200, 114751. https://doi.org/10.1016/j.wasman.2025.114751
Vancouver
Sun Y, Zhang K, Qi N, Chao C, Li X, Zhang D. Reaction performance of Non-Thermal plasma induced CO2 reforming of CH4 for landfill gas treatment. Waste Management. 2025;200:114751. doi:10.1016/j.wasman.2025.114751
BibTeX
@article{Sun2025,
author = {Sun, Yiping and Zhang, Kai and Qi, Nana and Chao, Cong and Li, Xianchun and Zhang, Dongke},
title = {Reaction performance of Non-Thermal plasma induced CO2 reforming of CH4 for landfill gas treatment},
journal = {Waste Management},
year = {2025},
volume = {200},
pages = {114751},
doi = {10.1016/j.wasman.2025.114751}
}
EUVIMED