EUVIMEDEUVIMED entdecken
Crossref

A combined process of reverse flotation and slurry electrolysis for step-by-step recovery of copper and gold from waste printed circuit boards

Tingting Chen, Yutong Cui, Yifan Li, Xin Ma, Wei Shu, Zhanfang Cao, Hong Zhong, Shuai Wang

Waste Management · 2025

DOI: 10.1016/j.wasman.2025.02.047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Waste Management, 2025. Verfasst von Tingting Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China. Hauptthemen laut MEDLINE: Copper, Electrolysis, Electronic Waste, Recycling. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Education Department of Hunan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Waste printed circuit boards (WPCBs) constitute a significant component of e-waste, harboring abundant recyclable valuable metals. The ongoing increase in e-waste requires an efficient recycling method to recover valuable metals, thereby enhancing the recycling efficiency. In this study, an efficient and environmentally friendly combined process of reverse flotation and two-step slurry electrolysis was used to recover copper and gold from WPCBs. In the reverse flotation process, tannic acid was conducted using as a dispersant to enhance the separation selectivity, and the recoveries of copper and gold from WPCBs reached 94.57 % and 98.01 % respectively. A new high-efficiency alkaline slurry electrolysis system with ethylenediamine (en), NH3·H2O, (NH4)2SO4 and Cu2+ was devoted to recover copper from WPCBs. Under the optimal conditions, the leaching ratio, electrodeposition recovery and current efficiency of copper from WPCBs were 99.57 %, 97.53 %, and 65.64 %, respectively. Afterwards, for the anode residue after copper recovery, a kind of electrolyte consisting only of potassium iodide (KI) was proposed for recovering gold by slurry electrolysis. Under the optimal conditions, the leaching ratio, electrodeposition recovery and current efficiency of gold from WPCBs were 99.08 %, 89.12 % and 3.57 %, respectively. Thus, the copper and gold from WPCBs are recovered step by step via slurry electrolysis in different systems, it is expected to realize the application of slurry electrolysis in the e-waste industry.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CopperElectrolysisElectronic WasteRecyclingGold

Stichwörter der Autor:innen

CopperGoldRecoveryReverse flotationSlurry electrolysisWPCBs

Substanzen

CopperGold

Autor:innen und Institutionen

  • College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China.
  • Dongguan Huanmiao Environmental Protection Technology Co., Ltd., Dongguan 523290, China.
  • College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China. Electronic address: wangshuai@csu.edu.cn.

Förderung

  • Education Department of Hunan Province

Zitieren

APA

Chen, T., Cui, Y., Li, Y., Ma, X., Shu, W., Cao, Z., Zhong, H., & Wang, S. (2025). A combined process of reverse flotation and slurry electrolysis for step-by-step recovery of copper and gold from waste printed circuit boards. Waste Management. https://doi.org/10.1016/j.wasman.2025.02.047

Vancouver

Chen T, Cui Y, Li Y, Ma X, Shu W, Cao Z, et al. A combined process of reverse flotation and slurry electrolysis for step-by-step recovery of copper and gold from waste printed circuit boards. Waste Management. 2025. doi:10.1016/j.wasman.2025.02.047

BibTeX
@article{Chen2025,
  author = {Chen, Tingting and Cui, Yutong and Li, Yifan and Ma, Xin and Shu, Wei and Cao, Zhanfang and Zhong, Hong and Wang, Shuai},
  title = {A combined process of reverse flotation and slurry electrolysis for step-by-step recovery of copper and gold from waste printed circuit boards},
  journal = {Waste Management},
  year = {2025},
  doi = {10.1016/j.wasman.2025.02.047}
}
Kostenlos starten →