Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst
Waste Management · 2024
DOI: 10.1016/j.wasman.2024.08.005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2024. Verfasst von Weibo Meng und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Henan Polytechnic University, Jiaozuo 454003, China. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Pyrolysis, Plastics. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Natural Science Foundation of Henan Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Plastic waste pollution is the serious environmental problem, and catalytic pyrolysis of waste plastics is an effective way to solve this problem. Carbon nanotubes (CNTs) are prepared by catalytic pyrolysis of low-density polyethylene (LDPE) waste plastics by one-stage method using iron nitrate and nickel nitrate as catalyst. The growth mechanism of CNTs is analyzed in detail. TPO, XRD, SEM and Raman analyses show that increasing Ni content contributes to the production of CNTs with good morphology and high graphitization degree. While the increasing Fe content contributes to improving the yield of CNTs. The outer and inner diameters of the FeNi12-CNTs-800 are about 21 nm and 8 nm with the length of 18.9 μm, respectively. LDPE pyrolysis gases are analyzed to determine that the primary carbon source required for CNTs growth is C2H4. The C2H4 adsorption and decomposition processes on FeNi alloys are performed to reveal the growth mechanism of CNTs, based on density functional theory calculation. Three kinds of the growth models are proposed to explain the difference of the CNTs tubular shape. FeNi12-CNTs-800 are used to remove microplastics from wastewater due to existence of magnetic. PVC can be quickly removed from wastewater with removal of 100 % at 20 min. This study provides an effective way for recycling and treatment of waste plastic.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Chemistry and Chemical Engineering, Henan Polytechnic University, Jiaozuo 454003, China.
- College of Chemistry and Chemical Engineering, Henan Polytechnic University, Jiaozuo 454003, China; Collaborative Innovation Center of Coal Work Safety and Clean High Efficiency Utilization, Jiaozuo 454003, China; Henan…
- College of Chemistry and Chemical Engineering, Henan Polytechnic University, Jiaozuo 454003, China; Collaborative Innovation Center of Coal Work Safety and Clean High Efficiency Utilization, Jiaozuo 454003, China. Elect…
- College of Chemistry and Chemical Engineering, Henan Polytechnic University, Jiaozuo 454003, China; Department of Cogno-Mechatronics Engineering, Department of Optics and Mechatronics Engineering, Pusan National Univers…
- Southeast University-Monash University Joint Graduate School, and Suzhou Industrial Park Monash Research Institute of Science & Technology, Suzhou 215000, China.
- Department of Cogno-Mechatronics Engineering, Department of Optics and Mechatronics Engineering, Pusan National University, Busan 46241, Republic of Korea.
Förderung
- Natural Science Foundation of Henan Province
- National Natural Science Foundation of China
Zitieren
APA
Meng, W., Xing, B., Cheng, S., Nie, Y., Zeng, H., Qu, X., Xu, B., Zhang, C., Yu, J., & Won Hong, S. (2024). Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst. Waste Management. https://doi.org/10.1016/j.wasman.2024.08.005
Vancouver
Meng W, Xing B, Cheng S, Nie Y, Zeng H, Qu X, et al. Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst. Waste Management. 2024. doi:10.1016/j.wasman.2024.08.005
BibTeX
@article{Meng2024,
author = {Meng, Weibo and Xing, Baolin and Cheng, Song and Nie, Yanhe and Zeng, Huihui and Qu, Xiaoxiao and Xu, Bing and Zhang, Chuanxiang and Yu, Jianglong and Won Hong, Suck},
title = {Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst},
journal = {Waste Management},
year = {2024},
doi = {10.1016/j.wasman.2024.08.005}
}
EUVIMED