New powder reuse schema in laser-based powder bed fusion of polymers
Waste Management · 2024-10 · 187 · 11-21
DOI: 10.1016/j.wasman.2024.06.030 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2024-10. Verfasst von Michał Olejarczyk und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Department of Laser Technologies, Automation and Production Organization, Wroclaw University of Science and Techno…. Hauptthemen laut MEDLINE: Recycling, Powders, Lasers, Polymers. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Narodowe Centrum Badań i Rozwoju.
Abstract (Originalsprache)
The laser-based powder bed fusion of polymers (PBF-LB/P) process often utilizes a blend of powders with varying degrees of degradation. Specifically, for polyamide 12, the traditional reuse schema involves mixing post-processed powder with virgin powder at a predetermined ratio before reintroducing it to the process. Given that only about 15% of the powder is utilized in part production, and powders are refreshed in equal proportions, there arises a challenge with the incremental accumulation of material across build cycles. To mitigate the consumption of fresh powder relative to the actual material usage, this study introduces the incorporation of recycled material into the PBF-LB/P process. This new powder reuse schema is presented for the first time, focusing on the laser sintering process. The characteristics of the recycled powder were evaluated through scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, particle size distribution, and dynamic powder flowability assessments. The findings reveal that waste powders can be effectively reused in PBF-LB/P to produce components with satisfactory mechanical properties, porosity levels, dimensional accuracy, and surface quality.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Department of Laser Technologies, Automation and Production Organization, Wroclaw University of Science and Technology, Wyb. Wyspiańskiego 27, 50-370 Wrocław, Poland. Electronic addres…
- Faculty of Mechanical Engineering, Department of Laser Technologies, Automation and Production Organization, Wroclaw University of Science and Technology, Wyb. Wyspiańskiego 27, 50-370 Wrocław, Poland.
- Faculty of Chemistry, Department of Engineering and Technology of Polymers, Wroclaw University of Science and Technology, Wyb. Wyspiańskiego 27, 50-370 Wrocław, Poland.
Förderung
- Narodowe Centrum Badań i Rozwoju
Zitieren
APA
Olejarczyk, M., Gruber, P., Gazińska, M., Krokos, A., Ziółkowski, G., Szymczyk-Ziółkowska, P., Grochowska, E., & Kurzynowski, T. (2024). New powder reuse schema in laser-based powder bed fusion of polymers. Waste Management, 187, 11-21. https://doi.org/10.1016/j.wasman.2024.06.030
Vancouver
Olejarczyk M, Gruber P, Gazińska M, Krokos A, Ziółkowski G, Szymczyk-Ziółkowska P, et al. New powder reuse schema in laser-based powder bed fusion of polymers. Waste Management. 2024;187:11-21. doi:10.1016/j.wasman.2024.06.030
BibTeX
@article{Olejarczyk2024,
author = {Olejarczyk, Michał and Gruber, Piotr and Gazińska, Małgorzata and Krokos, Anna and Ziółkowski, Grzegorz and Szymczyk-Ziółkowska, Patrycja and Grochowska, Emilia and Kurzynowski, Tomasz},
title = {New powder reuse schema in laser-based powder bed fusion of polymers},
journal = {Waste Management},
year = {2024},
volume = {187},
pages = {11--21},
doi = {10.1016/j.wasman.2024.06.030}
}
EUVIMED