Co-processing of end-of-life wind turbine blades in portland cement production
Waste Management · 2024-06 · 182 · 207-214
DOI: 10.1016/j.wasman.2024.04.033 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2024-06. Verfasst von Anton K Schindler und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Environmental Engineering, Auburn University, 237 Harbert Engineering Center, Auburn, AL 36849-5337, USA. Electronic address:…. Hauptthemen laut MEDLINE: Construction Materials. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: Electric Power Research Institute.
Abstract (Originalsprache)
The objective of this paper is to evaluate the feasibility of co-processing wind turbine blade (WTB) material in cement manufacturing to provide an end-of-life means to divert the solid waste of decommissioned WTBs from landfills. Many WTBs consist primarily of glass fiber reinforced thermoset polymers that are difficult to recover or recycle. Portland cement is produced world-wide in large quantities, requiring immense quantities of raw materials (mostly calcium oxide and silicon oxide) and kiln temperatures approaching 1,450 °C. This work contributes analyses of WTB material composition, and predicts the energy provided through the combustible components of the WTBs and raw material contributions provided by incorporating the incombustible components of the WTBs to produce cement. Approximately 40 to 50 % of the WTB material will contribute as fuel to cement production, and approximately 50 to 60 % of the WTB material is expected to be incombustible. One tonne of WTB material can displace approximately 0.4 to 0.5 tonne of coal, while also contributing approximately 0.1 tonne of calcium oxide and 0.3 tonne of silicon oxide as raw material to the cement production process. The glass fiber WTB tested had an average boron content of 4.5 % in the ash. The effects of this high boron content on the cement and its production process should be evaluated. Co-processing WTBs in cement plants will slightly reduce combustion-related CO2 emissions due to avoided calcination. It seems feasible to co-process glass-fiber reinforced WTBs in cement production as WTBs provide suitable raw materials and compatible fuel for this process.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Civil and Environmental Engineering, Auburn University, 237 Harbert Engineering Center, Auburn, AL 36849-5337, USA. Electronic address: schinak@auburn.edu.
- Department of Chemical Engineering, Auburn University, 212 Ross Hall, Auburn, AL 36849-5337, USA. Electronic address: dukeste@auburn.edu.
- Department of Chemical Engineering, Auburn University, 212 Ross Hall, Auburn, AL 36849-5337, USA. Electronic address: wbg0009@auburn.edu.
Förderung
- Electric Power Research Institute
Zitieren
APA
Schindler, A. K., Duke, S. R., & Galloway, W. B. (2024). Co-processing of end-of-life wind turbine blades in portland cement production. Waste Management, 182, 207-214. https://doi.org/10.1016/j.wasman.2024.04.033
Vancouver
Schindler AK, Duke SR, Galloway WB. Co-processing of end-of-life wind turbine blades in portland cement production. Waste Management. 2024;182:207-214. doi:10.1016/j.wasman.2024.04.033
BibTeX
@article{Schindler2024,
author = {Schindler, Anton K and Duke, Steve R and Galloway, W Braxton},
title = {Co-processing of end-of-life wind turbine blades in portland cement production},
journal = {Waste Management},
year = {2024},
volume = {182},
pages = {207--214},
doi = {10.1016/j.wasman.2024.04.033}
}
EUVIMED