Innovative building materials by upcycling clothing waste into thermal energy storage matrix with phase change materials
Waste Management · 2024-03 · 175 · 328-338
DOI: 10.1016/j.wasman.2024.01.021 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2024-03. Verfasst von Dongchan Jin und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea. Hauptthemen laut MEDLINE: Hot Temperature, Textiles. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: Ministry of Science, ICT and Future Planning, National Research Foundation of Korea.
Abstract (Originalsprache)
The current volume of clothing waste reached 115 million tons in 2021 and is projected to increase to approximately 150 million tons by 2030. This significant surge in clothing waste has prompted heightened discussions regarding environmentally friendly recycling methods. Clothing presents complex properties, posing substantial challenges to recycling and usually resulting in environmental pollution when disposed. In this study, our recycling approach capitalizes on the differing melting points of textiles. This transformation was achieved through a physical process that included an opening procedure and high temperature heat compression. Textile materials exhibit exceptional thermal properties. Through experimentation on 50 g fiber specimens, thermal conductivities similar to commercial insulation materials were observed, registering an average of 0.0592 W/m·K at 20 °C and 0.06053 W/m·K at 40 °C. This study explores the impregnation of phase change materials (PCMs) into clothing waste-based specimens, equipping them with heat storage capabilities. During the experimental phase, we employed three distinct types of PCMs to evaluate their thermal properties and heat storage capacities in relation to their respective melting temperatures. Through thermal properties analysis, we determined the latent heat capacity of each specimen, ranging from a minimum of 6.63 J/g to a maximum of 75.81 J/g. Our observations indicated a reduction in peak temperature and time-leg effects attributable to the use of PCMs for surface heat flow. This research underscores the superior thermal performance of construction and building materials derived from clothing waste, enhanced by the integration of PCMs, when compared to traditional materials and other waste-derived alternatives.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea.
- Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea. Electronic address: kimsumin@yonsei.ac.kr.
Förderung
- Ministry of Science, ICT and Future Planning
- National Research Foundation of Korea
Zitieren
APA
Jin, D., Yong Choi, J., Nam, J., Yuk, H., & Kim, S. (2024). Innovative building materials by upcycling clothing waste into thermal energy storage matrix with phase change materials. Waste Management, 175, 328-338. https://doi.org/10.1016/j.wasman.2024.01.021
Vancouver
Jin D, Yong Choi J, Nam J, Yuk H, Kim S. Innovative building materials by upcycling clothing waste into thermal energy storage matrix with phase change materials. Waste Management. 2024;175:328-338. doi:10.1016/j.wasman.2024.01.021
BibTeX
@article{Jin2024,
author = {Jin, Dongchan and Yong Choi, Ji and Nam, Jihee and Yuk, Hyeonseong and Kim, Sumin},
title = {Innovative building materials by upcycling clothing waste into thermal energy storage matrix with phase change materials},
journal = {Waste Management},
year = {2024},
volume = {175},
pages = {328--338},
doi = {10.1016/j.wasman.2024.01.021}
}
EUVIMED