EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Carbon black preparation by partial oxidation of spent tyre pyrolysis oil – Influence of temperature, residence time and oxygen to feed ratio

Chiemeka Onyeka Okoye, Zhezi Zhang, Dongke Zhang

Waste Management · 2024-02 · 174 · 273-281

DOI: 10.1016/j.wasman.2023.11.040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Waste Management, 2024-02. Verfasst von Chiemeka Onyeka Okoye und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Energy (M473), The University of Western Australia, 35 Stirling Highway, Crawley, WA 6009, Australia. Electronic address: chiemeka.okoye@u…. Hauptthemen laut MEDLINE: Soot, Oxygen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Western Australia, Australian Research Council, Australian Government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Preparation of carbon black (CB) by partial oxidation of the spent tyre pyrolysis oil (STPO) and its heavy residue fraction (HRF) was systematically studied using a lab-scale drop tube furnace. The effect of furnace operating temperature (T: 1100 to 1400 °C), residence time (tr: 5 to 60 s) and oxygen to feed ratio (O/F: 174 to 732) on the yield and quality of CB was examined using the response surface methodology (RSM). T was shown to have the most significant influence on CB yield and properties. While the CB yield was also influenced by tr, the quality was more sensitively dependent on T and O/F. The predicted optimal tr and O/F were approximately the same for both feedstocks (60 s and 174, respectively). However, T was higher for the HRF feedstock (1368 °C) than the STPO feedstock (1331 °C) due to the abundance of more viscous heavy hydrocarbons in HRF. Validation experiments under the aforementioned conditions demonstrated the models' ability to predict responses accurately. The CB from both feedstocks had low contents of ash (

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SootOxygenTemperaturePyrolysisOils

Stichwörter der Autor:innen

Box-Behnken designCarbon blackFurnace black processProcess variablesTyre derived-oil

Substanzen

SootOxygenOils

Autor:innen und Institutionen

  • Centre for Energy (M473), The University of Western Australia, 35 Stirling Highway, Crawley, WA 6009, Australia. Electronic address: chiemeka.okoye@uwa.edu.au.
  • Centre for Energy (M473), The University of Western Australia, 35 Stirling Highway, Crawley, WA 6009, Australia.

Förderung

  • University of Western Australia
  • Australian Research Council
  • Australian Government

Zitieren

APA

Okoye, C. O., Zhang, Z., & Zhang, D. (2024). Carbon black preparation by partial oxidation of spent tyre pyrolysis oil – Influence of temperature, residence time and oxygen to feed ratio. Waste Management, 174, 273-281. https://doi.org/10.1016/j.wasman.2023.11.040

Vancouver

Okoye CO, Zhang Z, Zhang D. Carbon black preparation by partial oxidation of spent tyre pyrolysis oil – Influence of temperature, residence time and oxygen to feed ratio. Waste Management. 2024;174:273-281. doi:10.1016/j.wasman.2023.11.040

BibTeX
@article{Okoye2024,
  author = {Okoye, Chiemeka Onyeka and Zhang, Zhezi and Zhang, Dongke},
  title = {Carbon black preparation by partial oxidation of spent tyre pyrolysis oil – Influence of temperature, residence time and oxygen to feed ratio},
  journal = {Waste Management},
  year = {2024},
  volume = {174},
  pages = {273--281},
  doi = {10.1016/j.wasman.2023.11.040}
}
Kostenlos starten →