Electrorefining and electrodeposition for metal separation and purification from polymetallic concentrates after waste printed circuit board smelting
Waste Management · 2023
DOI: 10.1016/j.wasman.2023.01.014 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste Management, 2023. Verfasst von Qinyi Xia und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, People's Republic of China. Hauptthemen laut MEDLINE: Copper, Electronic Waste. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Multi metal recycling from waste printed circuit boards (WPCBs) is attractive for resource conservation and sustainability. While smelting is commonly adopted to produce polymetallic concentrates from WPCBs, current processes cost oxidation smelting and fire refining followed by electrorefining to deport co-existing base metals and recover copper, which can cause substantial metal losses, long steps, and lack of effective methods for subsequent base metal recycling. Here, direct electrorefining of polymetallic concentrates (Cu-Ni-Fe-Pb-sn-Au-Ag) combined with electrodeposition was investigated to realize multi metal separation and purification. It was found that direct electrorefining of concentrates in H2SO4/CuSO4 electrolyte at 0.4 V realized >98% base metal dissolution and copper production (∼99% purity), serving as a combined metal leaching and copper electrowinning procedure. PbSO4-SnO2-Cu5FeS4 precipitate was formed in anode slime, with Ag-Au enriched by 8.5-61 times. Analysis on subsequent selective metal electrodeposition revealed the blocking effect of Zn2+ and overlapped potential region of Fe2+-Ni2+, emphasizing the importance of Zn and Fe pre-separation during smelting and chemical precipitation. Electrodeposition experiments demonstrated high selectivity for Cu and Ni at 0.05 and -0.7 V, where Ni2+ shows complex electroreduction behaviors. The proposed process can serve as an alternative feasible route for multi metal recycling from WPCBs.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, People's Republic of China.
- School of Environmental Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, People's Republic of China. Electronic address: zmxu@sjtu.edu.cn.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Xia, Q., Song, Q., & Xu, Z. (2023). Electrorefining and electrodeposition for metal separation and purification from polymetallic concentrates after waste printed circuit board smelting. Waste Management. https://doi.org/10.1016/j.wasman.2023.01.014
Vancouver
Xia Q, Song Q, Xu Z. Electrorefining and electrodeposition for metal separation and purification from polymetallic concentrates after waste printed circuit board smelting. Waste Management. 2023. doi:10.1016/j.wasman.2023.01.014
BibTeX
@article{Xia2023,
author = {Xia, Qinyi and Song, Qingming and Xu, Zhenming},
title = {Electrorefining and electrodeposition for metal separation and purification from polymetallic concentrates after waste printed circuit board smelting},
journal = {Waste Management},
year = {2023},
doi = {10.1016/j.wasman.2023.01.014}
}
EUVIMED