EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

High-flux ultrasonic processing for lithium separation using ionic liquid impregnated composite membranes

Behrang Golmohammadi, Hemayat Shekaari

Ultrasonics Sonochemistry · 2024-08 · 108 · 106974

DOI: 10.1016/j.ultsonch.2024.106974 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ultrasonics Sonochemistry, 2024-08. Verfasst von Behrang Golmohammadi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz 5166616471, Iran. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: University of Tabriz.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Battery industry, one of the most crucial components of the modern world, relies heavily on lithium production, and brines from the spent battery materials is one of the most important sources to exploit lithium. A new ultrasonic assisted membrane processing is proposed for lithium separation simulated brine. The effects of membrane composition, feed concentration, and ultrasonic conditions on the lithium extraction efficiency have been explored. The composite membrane including polysulfone (PSF) as the support and 1-alkyl-3-methylimidazolium hexafluorophosphate and tributyl phosphate as ionic liquid membrane. A porous PVC membrane has been used for prevention of the ILM loss. The optimal ultrasonic frequency is approximately 250 kHz, which matches the bulk modulus of the membrane and enhances the separation efficiency. Higher frequencies and optimized amplitude and pulse cycle settings further improve the lithium flux and selectivity. Moreover, higher flux and selectivity are achieved when separating lithium from alkali metal chlorides at higher feed concentrations, ranging from 250 ppm to 1000 ppm. The mechanism of enhanced lithium extraction by ultrasonics is attributed to the combination of microbubble formation, cavitation, and heat generation, which disrupt the concentration gradient and facilitate lithium transport across the membrane.

Schlagwörter

Stichwörter der Autor:innen

Alkali metal brineComposite membraneIonic liquid membraneLithium separationUltrasonic assisted membrane separation

Autor:innen und Institutionen

  • Department of Physical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz 5166616471, Iran.
  • Department of Physical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz 5166616471, Iran. Electronic address: hemayatt@yahoo.com.

Förderung

  • University of Tabriz

Zitieren

APA

Golmohammadi, B., & Shekaari, H. (2024). High-flux ultrasonic processing for lithium separation using ionic liquid impregnated composite membranes. Ultrasonics Sonochemistry, 108, 106974. https://doi.org/10.1016/j.ultsonch.2024.106974

Vancouver

Golmohammadi B, Shekaari H. High-flux ultrasonic processing for lithium separation using ionic liquid impregnated composite membranes. Ultrasonics Sonochemistry. 2024;108:106974. doi:10.1016/j.ultsonch.2024.106974

BibTeX
@article{Golmohammadi2024,
  author = {Golmohammadi, Behrang and Shekaari, Hemayat},
  title = {High-flux ultrasonic processing for lithium separation using ionic liquid impregnated composite membranes},
  journal = {Ultrasonics Sonochemistry},
  year = {2024},
  volume = {108},
  pages = {106974},
  doi = {10.1016/j.ultsonch.2024.106974}
}
Kostenlos starten →