EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Carboxymethyl cellulose-agarose-gelatin: A thermoresponsive triad bioink composition to fabricate volumetric soft tissue constructs

Muthu Parkkavi Sekar, Harshavardhan Budharaju, Swaminathan Sethuraman, Dhakshinamoorthy Sundaramurthi

SLAS Technology · 2023-06 · 28 (3) · 183-198

DOI: 10.1016/j.slast.2023.04.005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SLAS Technology, 2023-06. Verfasst von Muthu Parkkavi Sekar und 3 weiteren Autor:innen. Beteiligte Einrichtung: Tissue Engineering & Additive Manufacturing (TEAM) Lab, Centre for Nanotechnology & Advanced Biomaterials, ABCDE Innovation Centre, School of Chemica…. Hauptthemen laut MEDLINE: Gelatin, Carboxymethylcellulose Sodium. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Department of Science and Technology, Council of Scientific and Industrial Research, India, Indian Council of Medical Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polysaccharide based hydrogels have been predominantly utilized as ink materials for 3D bioprinting due to biocompatibility and cell responsive features. However, most hydrogels require extensive crosslinking due to poor mechanical properties leading to limited printability. To improve printability without using cytotoxic crosslinkers, thermoresponsive bioinks could be developed. Agarose is a thermoresponsive polysaccharide with upper critical solution temperature (UCST) for sol-gel transition at 35-37 °C. Therefore, we hypothesized that a triad of carboxymethyl cellulose(C)-agarose(A)-gelatin(G) could be a suitable thermoresponsive ink for printing since they undergo instantaneous gelation without any addition of crosslinkers after bioprinting. The blend of agarose-carboxymethyl cellulose was mixed with 1% w/v, 3% w/v and 5% w/v gelatin to optimize the triad ratio for hydrogel formation. It was observed that a blend (C2-A0.5-G1 and C2-A1-G1) containing 2% w/v carboxymethyl cellulose, 0.5% or 1% w/v agarose and 1% w/v gelatin formed better hydrogels with higher stability for up to 21 days in DPBS at 37 °C. Further, C2-A0.5-G1 and C2-A1-G1hydrogels showed higher storage modulus 762 ± 182 Pa & 2452 ± 430 Pa, higher porosity of 96.98 ± 2% & 98.2 ± 0.8% and swellability of 1518 ± 68% & 1587 ± 25% respectively. To evaluate the in vitro potential of these bioink formulations, indirect and direct cytotoxicity were determined using NCTC clone 929 (mouse fibroblast cells) and HADF (primary human adult dermal fibroblast) cells as per the ISO 10993-5 standards. Importantly, the printability of these bioinks was confirmed using extrusion bioprinting by successfully printing different complex 3D patterns.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GelatinCarboxymethylcellulose SodiumMiceAnimalsHumansSepharosePrinting, Three-DimensionalRheologyHydrogels

Stichwörter der Autor:innen

3D BioprintingAgaroseBioinkCarboxymethyl celluloseGelatinHydrogel

Substanzen

GelatinSepharoseCarboxymethylcellulose SodiumHydrogels

Autor:innen und Institutionen

  • Tissue Engineering & Additive Manufacturing (TEAM) Lab, Centre for Nanotechnology & Advanced Biomaterials, ABCDE Innovation Centre, School of Chemical & Biotechnology, SASTRA Deemed University, Thanjavur, Tamil Nadu 613…

Förderung

  • Department of Science and Technology
  • Council of Scientific and Industrial Research, India
  • Indian Council of Medical Research
  • Department of Biotechnology

Zitieren

APA

Sekar, M. P., Budharaju, H., Sethuraman, S., & Sundaramurthi, D. (2023). Carboxymethyl cellulose-agarose-gelatin: A thermoresponsive triad bioink composition to fabricate volumetric soft tissue constructs. SLAS Technology, 28(3), 183-198. https://doi.org/10.1016/j.slast.2023.04.005

Vancouver

Sekar MP, Budharaju H, Sethuraman S, Sundaramurthi D. Carboxymethyl cellulose-agarose-gelatin: A thermoresponsive triad bioink composition to fabricate volumetric soft tissue constructs. SLAS Technology. 2023;28(3):183-198. doi:10.1016/j.slast.2023.04.005

BibTeX
@article{Sekar2023,
  author = {Sekar, Muthu Parkkavi and Budharaju, Harshavardhan and Sethuraman, Swaminathan and Sundaramurthi, Dhakshinamoorthy},
  title = {Carboxymethyl cellulose-agarose-gelatin: A thermoresponsive triad bioink composition to fabricate volumetric soft tissue constructs},
  journal = {SLAS Technology},
  year = {2023},
  volume = {28},
  number = {3},
  pages = {183--198},
  doi = {10.1016/j.slast.2023.04.005}
}
Kostenlos starten →