Anchoring phase change interface enhances solar thermal energy storage
Science Bulletin · 2026-05 · 71 (10) · 2497-2507
DOI: 10.1016/j.scib.2026.04.024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Bulletin, 2026-05. Verfasst von Qiao Xu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; College of Materials Science and E…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Jiangsu Province, Jiangsu Provincial Key Laboratory of Aeronautical Power Systems.
Abstract (Originalsprache)
Solar thermal energy storage based on phase change materials (PCMs) provides a compact, near-isothermal pathway toward decarbonizing thermal energy supplies. However, the intrinsic recession of the solid-liquid interface away from the irradiated surface leads to gradually increasing thermal resistance and decaying charging rate with time. To address this challenge, we demonstrate that anchoring the phase change interface achieves rapid, efficient, and continuous solar thermal charging. This is enabled by dynamically circulating photothermal core-shell composite phase change particles (CPCPs) to continuously renew the irradiated surface. Scalable CPCPs, fabricated via extrusion-spheronization, consist of a MnFe2O4 photothermal shell and an MgO/h-BN/NaCl-KCl core integrating broadband photon absorption with high thermal conductivity within a single particle. The MnFe2O4 shell delivers a solar-weighted absorptance of 91.1%, facilitated by near-surface photon confinement and internal multiple scattering. Within the core, a percolated MgO skeleton combined with in-plane h-BN phonon transport pathways forms a hierarchical ceramic network. The interfacial phonon-spectrum overlap in this structure reduces Kapitza resistance, elevating the effective thermal conductivity to 6.84 W m-1 K-1, while maintaining a high energy storage density of 844.7 kJ kg-1. By matching the incident solar flux with particle stream mass flow rates, the system attains a charging power of 0.54 kW under 1.08 kW solar input. This yields a solar thermal storage efficiency of 49.7%, a 26-fold improvement over conventional diffusion-limited approaches (1.9%). This work introduces a paradigm shift from the conventional diffusion-limited "material-static, interface-retreating" mode to "material-moving, interface-anchoring" mode, leading to rapid, efficient, and continuous solar thermal energy storage.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China.
- School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; Guoneng Changzhou Power Generation Co., Ltd., Changzhou 213033, China.
- Beijing Institute of Spacecraft System Engineering, Beijing 100094, China.
- School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China. Electronic address: xliu@nuaa.edu.cn.
- Jiangsu Guoxin Jingjiang Power Generation Co., Ltd., Taizhou 214500, China.
- School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
Förderung
- National Key Research and Development Program of China
- Natural Science Foundation of Jiangsu Province
- Jiangsu Provincial Key Laboratory of Aeronautical Power Systems
- National Natural Science Foundation of China
Zitieren
APA
Xu, Q., Zhu, J., Wang, Y., Liu, X., Wang, T., Wang, J., Lv, S., & Li, Y. (2026). Anchoring phase change interface enhances solar thermal energy storage. Science Bulletin, 71(10), 2497-2507. https://doi.org/10.1016/j.scib.2026.04.024
Vancouver
Xu Q, Zhu J, Wang Y, Liu X, Wang T, Wang J, et al. Anchoring phase change interface enhances solar thermal energy storage. Science Bulletin. 2026;71(10):2497-2507. doi:10.1016/j.scib.2026.04.024
BibTeX
@article{Xu2026,
author = {Xu, Qiao and Zhu, Jingwen and Wang, Yan and Liu, Xianglei and Wang, Tao and Wang, Jianguo and Lv, Shushan and Li, Yongliang},
title = {Anchoring phase change interface enhances solar thermal energy storage},
journal = {Science Bulletin},
year = {2026},
volume = {71},
number = {10},
pages = {2497--2507},
doi = {10.1016/j.scib.2026.04.024}
}
EUVIMED