Realizing high-efficiency thermoelectric module by suppressing donor-like effect and improving preferred orientation in n-type Bi2(Te, Se)3
Science Bulletin · 2024-06 · 69 (11) · 1728-1737
DOI: 10.1016/j.scib.2024.04.034 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Bulletin, 2024-06. Verfasst von Yichen Li und 15 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 95-mal zitiert (Crossref) und nennt 76 Literaturangaben. Gefördert von: Beijing Natural Science Foundation, National Science Fund for Distinguished Young Scholars, Higher Education Discipline Innovation Project.
Abstract (Originalsprache)
Thermoelectric materials have a wide range of application because they can be directly used in refrigeration and power generation. And the Bi2Te3 stand out because of its excellent thermoelectric performance and are used in commercial thermoelectric devices. However, n-type Bi2Te3 has seriously hindered the development of Bi2Te3-based thermoelectric devices due to its weak mechanical properties and inferior thermoelectric performance. Therefore, it is urgent to develop a high-performance n-type Bi2Te3 polycrystalline. In this work, we employed interstitial Cu and the hot deformation process to optimize the thermoelectric properties of Bi2Te2.7Se0.3, and a high-performance thermoelectric module was fabricated based on this material. Our combined theoretical and experimental effort indicates that the interstitial Cu reduce the defect density in the matrix and suppresses the donor-like effect, leading to a lattice plainification effect in the material. In addition, the two-step hot deformation process significantly improves the preferred orientation of the material and boosts the mobility. As a result, a maximum ZT of 1.27 at 373 K and a remarkable high ZTave of 1.22 across the temperature range of 300-425 K are obtained. The thermoelectric generator (TEG, 7-pair) and thermoelectric cooling (TEC, 127-pair) modules were fabricated with our n-type textured Cu0.01Bi2Te2.7Se0.3 coupled with commercial p-type Bi2Te3. The TEC module demonstrates superior cooling efficiency compared with the commercial Bi2Te3 device, achieving a ΔT of 65 and 83.4 K when the hot end temperature at 300 and 350 K, respectively. In addition, the TEG module attains an impressive conversion efficiency of 6.5% at a ΔT of 225 K, which is almost the highest value among the reported Bi2Te3-based TEG modules.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Beihang University, Beijing 100191, China.
- School of Materials Science and Engineering, Beihang University, Beijing 100191, China; Tianmushan Laboratory, Hangzhou 311115, China.
- Huabei Cooling Device Co. LTD., Langfang 065400, China.
- Center for High Pressure Science and Technology Advanced Research (HPSTAR), Beijing 100094, China.
- School of Materials Science and Engineering, Beihang University, Beijing 100191, China. Electronic address: xiehongyao@buaa.edu.cn.
- School of Materials Science and Engineering, Beihang University, Beijing 100191, China; Tianmushan Laboratory, Hangzhou 311115, China. Electronic address: zhaolidong@buaa.edu.cn.
Förderung
- Beijing Natural Science Foundation
- National Science Fund for Distinguished Young Scholars
- Higher Education Discipline Innovation Project
- National Natural Science Foundation of China
- Northwestern University
Zitieren
APA
Li, Y., Bai, S., Wen, Y., Zhao, Z., Wang, L., Liu, S., Zheng, J., Wang, S., Liu, S., Gao, D., Liu, D., Zhu, Y., Cao, Q., Gao, X., Xie, H., & Zhao, L. D. (2024). Realizing high-efficiency thermoelectric module by suppressing donor-like effect and improving preferred orientation in n-type Bi2(Te, Se)3. Science Bulletin, 69(11), 1728-1737. https://doi.org/10.1016/j.scib.2024.04.034
Vancouver
Li Y, Bai S, Wen Y, Zhao Z, Wang L, Liu S, et al. Realizing high-efficiency thermoelectric module by suppressing donor-like effect and improving preferred orientation in n-type Bi2(Te, Se)3. Science Bulletin. 2024;69(11):1728-1737. doi:10.1016/j.scib.2024.04.034
BibTeX
@article{Li2024,
author = {Li, Yichen and Bai, Shulin and Wen, Yi and Zhao, Zhe and Wang, Lei and Liu, Shibo and Zheng, Junqing and Wang, Siqi and Liu, Shan and Gao, Dezheng and Liu, Dongrui and Zhu, Yingcai and Cao, Qian and Gao, Xiang and Xie, Hongyao and Zhao, Li-Dong},
title = {Realizing high-efficiency thermoelectric module by suppressing donor-like effect and improving preferred orientation in n-type Bi2(Te, Se)3},
journal = {Science Bulletin},
year = {2024},
volume = {69},
number = {11},
pages = {1728--1737},
doi = {10.1016/j.scib.2024.04.034}
}
EUVIMED