IoT-integrated hydroponic system for green fodder production: Environmental monitoring, automated irrigation, and ventilation
Results in Engineering · 2026-12 · 32 · 113289
DOI: 10.1016/j.rineng.2026.113289 ↗Kurz gefasst
Fachartikel in der Zeitschrift Results in Engineering, 2026-12. Verfasst von Jesús Alberto González-Pedroza und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría de Ciencia, Humanidades, Tecnología e Innovación, National Polytechnic Institute.
Abstract (Originalsprache)
Small-scale green fodder hydroponic (GFH) production in water-scarce regions faces three practical barriers: it depends on manual intervention for irrigation and phase management, environmental control is limited in low-cost installations, and productive yields are assumed to require chemically conditioned water. These constraints are rarely examined with continuous instrumentation over successive production cycles. This work presents an automated hydroponic cell for GFH production with yellow corn ( Zea mays ), which was designed, implemented, and evaluated over three complete production cycles. The system integrates continuous IoT monitoring of six environmental variables (nominal 30 s acquisition loop, ≈ 33 s effective), dual-criteria automated irrigation, scheduled ventilation, and a phenology-based biphasic cultivation protocol triggered by visual inspection of coleoptile emergence. A Telegram-based alert subsystem delivers notifications of critical events that can be received outside the local network. All cycles used municipal tap water at its native chemistry (pH 7.9–8.1, EC ≈ 1.0–1.2 mS/cm), without pH or EC adjustment, as a deliberate design condition. Across the three sequential, non-identical cycles, the fresh-biomass conversion index was 2.82:1, 4.02:1, and 4.03:1, and the proportion of readings with ambient humidity inside the 50–70% target band increased from ≈ 25% to 68%. The system delivered 15.9–37.9 L of irrigation water per cycle (9.9–22.7 mL per gram of fresh biomass), and the estimated actuator energy (pump, fans, and lamps) was 5.7–11.9 kWh per cycle. All processed records, figures, and the pseudocode of the processing workflow are openly available. These results show that productive fresh-biomass accumulation is feasible with native-chemistry tap water under the conditions tested, and that an integrated low-cost IoT platform can monitor, document, and iteratively improve GFH production, supporting its adoption by small-scale producers in resource-limited settings.
Förderung
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación
- National Polytechnic Institute
Zitieren
APA
González-Pedroza, J. A., Garay-Jiménez, L. I., & Escamilla-Ambrosio, P. J. (2026). IoT-integrated hydroponic system for green fodder production: Environmental monitoring, automated irrigation, and ventilation. Results in Engineering, 32, 113289. https://doi.org/10.1016/j.rineng.2026.113289
Vancouver
González-Pedroza JA, Garay-Jiménez LI, Escamilla-Ambrosio PJ. IoT-integrated hydroponic system for green fodder production: Environmental monitoring, automated irrigation, and ventilation. Results in Engineering. 2026;32:113289. doi:10.1016/j.rineng.2026.113289
BibTeX
@article{GonzlezPedroza2026,
author = {González-Pedroza, Jesús Alberto and Garay-Jiménez, Laura Ivoone and Escamilla-Ambrosio, Ponciano Jorge},
title = {IoT-integrated hydroponic system for green fodder production: Environmental monitoring, automated irrigation, and ventilation},
journal = {Results in Engineering},
year = {2026},
volume = {32},
pages = {113289},
doi = {10.1016/j.rineng.2026.113289}
}
EUVIMED