Dental resins face to face with the future. Comparing the mechanical strength of various acrylic resins used in the manufacturing of denture bases
Results in Engineering · 2026-12 · 32 · 112425
DOI: 10.1016/j.rineng.2026.112425 ↗Kurz gefasst
Fachartikel in der Zeitschrift Results in Engineering, 2026-12. Verfasst von Gabriel-Remus Kapor und 1 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study investigates the compressive strength of complete removable dentures manufactured using three different techniques and acrylic resin materials, with the goal of determining which method yields the most mechanically reliable prosthesis. Three pairs of complete acrylic dentures were created using three manufacturing methodse: injection molding, additive manufacturing using stereolitography and thermopolymerization. To maintain consistency and ensure valid comparisons across all experimental groups, identical opposing dental arches manufactured from a chromium-nickel alloy were used throughout all tests. Results revealed significant differences in compressive strength across the three groups, with injection-molded dentures demonstrating the highest mechanical properties, followed by the thermal polymerization dentures while the additive manufactured dentures recorded the lowest values. These findings underscore the considerable influence that both material choice and manufacturing technique have on the mechanical performance of complete removable dentures.
Zitieren
APA
Kapor, G., & Șerban, D. (2026). Dental resins face to face with the future. Comparing the mechanical strength of various acrylic resins used in the manufacturing of denture bases. Results in Engineering, 32, 112425. https://doi.org/10.1016/j.rineng.2026.112425
Vancouver
Kapor G, Șerban D. Dental resins face to face with the future. Comparing the mechanical strength of various acrylic resins used in the manufacturing of denture bases. Results in Engineering. 2026;32:112425. doi:10.1016/j.rineng.2026.112425
BibTeX
@article{Kapor2026,
author = {Kapor, Gabriel-Remus and Șerban, Dan-Andrei},
title = {Dental resins face to face with the future. Comparing the mechanical strength of various acrylic resins used in the manufacturing of denture bases},
journal = {Results in Engineering},
year = {2026},
volume = {32},
pages = {112425},
doi = {10.1016/j.rineng.2026.112425}
}
EUVIMED