Effect of tray elevation and cassava load on solar drying performance, energy efficiency, and drying kinetics
Results in Engineering · 2026-03 · 29 · 109491
DOI: 10.1016/j.rineng.2026.109491 ↗Kurz gefasst
Fachartikel in der Zeitschrift Results in Engineering, 2026-03. Verfasst von Sopa Cansee und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mahasarakham University.
Abstract (Originalsprache)
This study evaluates the effects of tray elevation and cassava chip load density on solar drying performance, energy efficiency, and drying kinetics under natural sun-drying conditions in Northeastern Thailand. A full factorial experimental design was applied using three surface load densities (16, 32, and 48 kg m⁻²) and four tray elevations (0, 30, 60, and 90 cm). Drying time, thermal efficiency ( η ), specific energy consumption ( SEC ), and effective moisture diffusivity ( D e f f ) were analyzed. Statistical significance was assessed at a probability level of p < 0.05. The results indicate that tray elevation and load density significantly affected drying time, η, and SEC ( p < 0.0001). The optimal configuration—30 cm tray elevation with a load density of 48 kg m⁻²—reduced drying time by 26%, increased thermal efficiency by 36%, and decreased SEC by 27% compared with conventional ground-level drying. Drying kinetics analysis showed that the Midilli model best described moisture ratio behavior, yielding coefficients of determination ( R² ) greater than 0.99 and the lowest root mean square error ( RMSE ). D e f f increased with tray elevation, ranging from 1.36 × 10⁻⁵ to 1.08 × 10⁻⁴ m² h⁻¹, reflecting enhanced internal mass transfer associated with improved natural convection. Overall, tray elevation is shown to be a simple yet effective passive modification that substantially improves solar drying performance without auxiliary energy input or complex dryer systems. This approach provides a cost-effective, scalable, and energy-efficient alternative to traditional open sun drying and hybrid solar dryers, supporting low-carbon postharvest processing in tropical agricultural systems.
Förderung
- Mahasarakham University
Zitieren
APA
Cansee, S., Saenkham, S., Hu, S., & Kanasri, T. (2026). Effect of tray elevation and cassava load on solar drying performance, energy efficiency, and drying kinetics. Results in Engineering, 29, 109491. https://doi.org/10.1016/j.rineng.2026.109491
Vancouver
Cansee S, Saenkham S, Hu S, Kanasri T. Effect of tray elevation and cassava load on solar drying performance, energy efficiency, and drying kinetics. Results in Engineering. 2026;29:109491. doi:10.1016/j.rineng.2026.109491
BibTeX
@article{Cansee2026,
author = {Cansee, Sopa and Saenkham, Sarawut and Hu, Shenghua and Kanasri, Teerasad},
title = {Effect of tray elevation and cassava load on solar drying performance, energy efficiency, and drying kinetics},
journal = {Results in Engineering},
year = {2026},
volume = {29},
pages = {109491},
doi = {10.1016/j.rineng.2026.109491}
}
EUVIMED