EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Advances in amine-based absorption solvent engineering: Co-solvent strategies toward low-energy post-combustion CO₂ capture

Seyed Ahmadreza Amirsadat, Ahmad Azari, Ali Valizadeh

Results in Engineering · 2026-03 · 29 · 108910

DOI: 10.1016/j.rineng.2025.108910 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Results in Engineering, 2026-03. Verfasst von Seyed Ahmadreza Amirsadat und 2 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 295 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The continuous rise in anthropogenic CO ₂ emissions from fossil fuel combustion underscores the urgency of developing efficient carbon capture technologies. Among various methods, post-combustion CO ₂ capture using amine-based solvents remains the most mature and industrially viable. However, conventional aqueous-amine systems suffer from high regeneration energy demands, solvent degradation, and operational challenges. This study systematically reviews recent advances in amine-based solvents and co-solvent formulations designed to enhance absorption efficiency and reduce energy consumption. The discussion covers (i) thermodynamic and kinetic fundamentals of amine – CO ₂ interactions, (ii) the effects of co-solvent addition on viscosity, mass transfer, and thermal stability, and (iii) the influence of operating parameters on cyclic capacity and regeneration energy. Emerging classes such as water-lean, biphasic, and nanoparticle-enhanced systems are critically compared based on their absorption kinetics, desorption enthalpy, and stability under cyclic operation. Bibliometric analysis is used to map the evolution of research trends in solvent engineering. The review highlights that co-solvents such as glycols, sulfoxides, and glycol ethers can lower reboiler duty by up to 60% relative to aqueous mono-ethanolamine while maintaining comparable absorption performance. Remaining challenges include viscosity control, long-term solvent degradation, and scalability. Future research should focus on optimizing solvent composition, integrating process intensification techniques, and developing predictive models linking molecular structure to process performance.

Zitieren

APA

Amirsadat, S. A., Azari, A., & Valizadeh, A. (2026). Advances in amine-based absorption solvent engineering: Co-solvent strategies toward low-energy post-combustion CO₂ capture. Results in Engineering, 29, 108910. https://doi.org/10.1016/j.rineng.2025.108910

Vancouver

Amirsadat SA, Azari A, Valizadeh A. Advances in amine-based absorption solvent engineering: Co-solvent strategies toward low-energy post-combustion CO₂ capture. Results in Engineering. 2026;29:108910. doi:10.1016/j.rineng.2025.108910

BibTeX
@article{Amirsadat2026,
  author = {Amirsadat, Seyed Ahmadreza and Azari, Ahmad and Valizadeh, Ali},
  title = {Advances in amine-based absorption solvent engineering: Co-solvent strategies toward low-energy post-combustion CO₂ capture},
  journal = {Results in Engineering},
  year = {2026},
  volume = {29},
  pages = {108910},
  doi = {10.1016/j.rineng.2025.108910}
}
Kostenlos starten →