Hull girder ultimate strength of bulk carrier (HGUS-BC) evaluation: Structural performances subjected to true inclination conditions of stiffened panel members
Results in Engineering · 2023-06 · 18 · 101076
DOI: 10.1016/j.rineng.2023.101076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Results in Engineering, 2023-06. Verfasst von Imaduddin Faqih und 5 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Universitas Sebelas Maret.
Abstract (Originalsprache)
To enhance the safety of ship structure design, this study evaluated time-dependent hull girder ultimate strength considering thick corrosion and the inclination conditions of stiffened panels. The hull girder ultimate strength was calculated using incremental – iterative methods based on IACS-CSR in a bulk carrier hull model. The corrosion effect was measured as the thickness reduction in structural members, and inclination conditions were considered such as non-uniform uniaxial thrust, which influences the yield strength of structural members. The corrosion effect was investigated from 5 to 20 years of service time, wherein the corrosion rate was obtained based on a reference and was then divided into standard and severe corrosion rate conditions. The effect of non-uniform uniaxial thrust was considered the yield stress reduction on all the stiffener elements in an inclined position. The safety level of the design within each timeframe of the measured corrosion effect was then considered based on the ultimate limit state. This study found that the corrosion rate greatly affects HGUS, with severe
Förderung
- Universitas Sebelas Maret
Zitieren
APA
Faqih, I., Adiputra, R., Prabowo, A. R., Muhayat, N., Ehlers, S., & Braun, M. (2023). Hull girder ultimate strength of bulk carrier (HGUS-BC) evaluation: Structural performances subjected to true inclination conditions of stiffened panel members. Results in Engineering, 18, 101076. https://doi.org/10.1016/j.rineng.2023.101076
Vancouver
Faqih I, Adiputra R, Prabowo AR, Muhayat N, Ehlers S, Braun M. Hull girder ultimate strength of bulk carrier (HGUS-BC) evaluation: Structural performances subjected to true inclination conditions of stiffened panel members. Results in Engineering. 2023;18:101076. doi:10.1016/j.rineng.2023.101076
BibTeX
@article{Faqih2023,
author = {Faqih, Imaduddin and Adiputra, Ristiyanto and Prabowo, Aditya Rio and Muhayat, Nurul and Ehlers, Sören and Braun, Moritz},
title = {Hull girder ultimate strength of bulk carrier (HGUS-BC) evaluation: Structural performances subjected to true inclination conditions of stiffened panel members},
journal = {Results in Engineering},
year = {2023},
volume = {18},
pages = {101076},
doi = {10.1016/j.rineng.2023.101076}
}
EUVIMED