Ultrasonic Fatigue Behaviour of Additively Manufactured Ti-6Al-4V and Inconel 718: Influence of Build Orientation
Procedia Structural Integrity · 2026 · 82 · 153-161
DOI: 10.1016/j.prostr.2026.04.024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Procedia Structural Integrity, 2026. Verfasst von D. Montalvão und 6 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Research England, Bournemouth University.
Abstract (Originalsprache)
This study investigates build orientation effects on ultrasonic fatigue testing (UFT) calibration and mechanical behaviour of additively manufactured Ti-6Al-4V and Inconel 718 specimens. A statistical framework quantifies uncertainty propagation from measurement systems through calibration to stress-life estimation, which variability is a result from Additive Manufacturing (AM) specific variability including anisotropy, surface texture, and microstructural heterogeneity. Five specimens per material-orientation combination were tested at 20 kHz using Digital Image Correlation (DIC) and laser displacement measurements. Probabilistic calibration curves revealed orientation-dependent differences of 5-9% in stress-displacement relationships, with horizontal builds exhibiting higher effective stiffness than vertical builds. Monte Carlo simulations demonstrated that ±12.5% calibration uncertainty may propagate to two-order-of-magnitude variations (10 6 to 10 8 cycles) in predicted very high cycle fatigue (VHCF) life. Early fracture analysis identified build defects as dominant failure mechanisms. The framework provides confidence intervals essential for reliable VHCF characterization and industrial qualification of AM components in fatigue-critical applications.
Förderung
- Research England
- Bournemouth University
Zitieren
APA
Montalvão, D., Safari, S., Sewell, P., Abdelkader, A., Baxter, R., Johnston, I., & McCluskey, D. (2026). Ultrasonic Fatigue Behaviour of Additively Manufactured Ti-6Al-4V and Inconel 718: Influence of Build Orientation. Procedia Structural Integrity, 82, 153-161. https://doi.org/10.1016/j.prostr.2026.04.024
Vancouver
Montalvão D, Safari S, Sewell P, Abdelkader A, Baxter R, Johnston I, et al. Ultrasonic Fatigue Behaviour of Additively Manufactured Ti-6Al-4V and Inconel 718: Influence of Build Orientation. Procedia Structural Integrity. 2026;82:153-161. doi:10.1016/j.prostr.2026.04.024
BibTeX
@article{Montalvo2026,
author = {Montalvão, D. and Safari, S. and Sewell, P. and Abdelkader, A. and Baxter, R. and Johnston, I. and McCluskey, D.},
title = {Ultrasonic Fatigue Behaviour of Additively Manufactured Ti-6Al-4V and Inconel 718: Influence of Build Orientation},
journal = {Procedia Structural Integrity},
year = {2026},
volume = {82},
pages = {153--161},
doi = {10.1016/j.prostr.2026.04.024}
}
EUVIMED