EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pharmaceutical aerosol transport in airways: A combined machine learning (ML) and discrete element model (DEM) approach

Mohammad S. Islam, Puchanee Larpruenrudee, Md. Mizanur Rahman, Gongli Li, Shahid Husain, Adnan Munir, Ming Zhao, Emilie Sauret, Yuantong Gu

Powder Technology · 2024-12 · 448 · 120271

DOI: 10.1016/j.powtec.2024.120271 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Technology, 2024-12. Verfasst von Mohammad S. Islam und 8 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Technology Sydney, Australian Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The continuum and discrete phase interaction could significantly affect the inhaled particle's transport behaviour. The accurate analysis of continuum and discrete phase interaction needs computational fluid dynamics (CFD) and Discrete Element Method (DEM) simulation, which is computationally expensive. Therefore, this study aims to develop a novel machine learning (ML) prediction model from CFD-DEM data to predict pharmaceutical aerosol transport in airways accurately. This study uses the CFD model for the continuum and DEM for the discrete phases. A soft sphere approach was used to calculate the overlap of the colliding particles. Proper validation was performed to ensure the accuracy of the present model. The CFD-DEM model analysed the particle transport in an idealised and realistic airway model, and different methods were used to analyse the transport behaviour. As the flow rate increased from 15 to 60 lpm, the deposition efficiency (DE) significantly improved due to particle interaction, rising from 20 % to 42 % without interaction and from 50 % to a remarkable 76 % with interaction, demonstrating the critical role of particle interaction in enhancing DE across varying flow rates. During the particle-particle interaction, a stagnation point and a high-pressure zone were observed at the airway model's carinal angle. Finally, a ML prediction model is developed from CFD-DEM data, which accurately predicts the pharmaceutical aerosol deposition in airways. The ML prediction model predicts the deposition pattern for different flow rates and particle sizes without CFD-DEM simulations. The present findings and more case-specific investigation would advance the knowledge of aerosol transport in airways and benefit more efficient targeted drug delivery devices. • An advanced CFD-DEM-ML model for particle transport in airways; • Spring constant significantly influences the flow fields; • Deposition efficiency increases with the flow rate and particle diameter; • Particle-particle interaction significantly increase with the spring constant; • Deposition efficiency is significantly higher at the upper part of the airway.

Förderung

  • University of Technology Sydney
  • Australian Research Council

Zitieren

APA

Islam, M. S., Larpruenrudee, P., Rahman, M. M., Li, G., Husain, S., Munir, A., Zhao, M., Sauret, E., & Gu, Y. (2024). Pharmaceutical aerosol transport in airways: A combined machine learning (ML) and discrete element model (DEM) approach. Powder Technology, 448, 120271. https://doi.org/10.1016/j.powtec.2024.120271

Vancouver

Islam MS, Larpruenrudee P, Rahman MM, Li G, Husain S, Munir A, et al. Pharmaceutical aerosol transport in airways: A combined machine learning (ML) and discrete element model (DEM) approach. Powder Technology. 2024;448:120271. doi:10.1016/j.powtec.2024.120271

BibTeX
@article{Islam2024,
  author = {Islam, Mohammad S. and Larpruenrudee, Puchanee and Rahman, Md. Mizanur and Li, Gongli and Husain, Shahid and Munir, Adnan and Zhao, Ming and Sauret, Emilie and Gu, Yuantong},
  title = {Pharmaceutical aerosol transport in airways: A combined machine learning (ML) and discrete element model (DEM) approach},
  journal = {Powder Technology},
  year = {2024},
  volume = {448},
  pages = {120271},
  doi = {10.1016/j.powtec.2024.120271}
}
Kostenlos starten →