EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Building Otto: An open-source Franz diffusion cell autosampler for automating in vitro skin permeation studies

Keng Wooi Ng, Liam Archbold, Wing Man Lau

HardwareX · 2026-03 · 25 · e00735

DOI: 10.1016/j.ohx.2025.e00735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift HardwareX, 2026-03. Verfasst von Keng Wooi Ng und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Pharmacy, Newcastle University, King George VI Building, Queen Victoria Road, Newcastle upon Tyne NE1 7RU, United Kingdom. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Franz diffusion cell (FDC), widely used for measuring drug absorption across the skin, is usually operated manually. However, manual operation is not only labour-intensive and time-consuming, but inevitably introduces human errors and inter-operator variability. The requirement to perform regular sampling around the clock also presents a significant logistical challenge for researchers. Commercial FDC automation solutions are costly and require proprietary/bespoke FDC designs. To overcome these challenges, we have developed Otto as a customisable and affordable, aftermarket FDC automation solution, to be retrofitted to existing FDCs of generic specifications. Otto uses a modified cartesian 3D-printer as a gantry and adds liquid-handling capabilities using 3D-printed components and common, inexpensive laboratory consumables. Liquid samples are collected into standard autosampler vials. Capable of handling 100 samples per run, Otto supports a high throughput and integrates well with downstream analytical equipment, without modifying the FDC or the analytical equipment. Its programming is facilitated by OttoMate, a companion software application with a graphical user interface designed to generate human-readable code for Otto. Here, we describe the design, construction, operation and characterisation of Otto. To our knowledge, this is the first open-source, retrofittable FDC autosampler with such throughput.

Schlagwörter

Stichwörter der Autor:innen

3D printingAutomationDRUG absorptionHigh performance liquid chromatography (HPLC)Robotics

Autor:innen und Institutionen

  • School of Pharmacy, Newcastle University, King George VI Building, Queen Victoria Road, Newcastle upon Tyne NE1 7RU, United Kingdom.
  • Translational and Clinical Research Institute, Faculty of Medical Sciences, Newcastle University, William Leech Building, Framlington Place, Newcastle upon Tyne NE2 4HH, United Kingdom.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Ng, K. W., Archbold, L., & Lau, W. M. (2026). Building Otto: An open-source Franz diffusion cell autosampler for automating in vitro skin permeation studies. HardwareX, 25, e00735. https://doi.org/10.1016/j.ohx.2025.e00735

Vancouver

Ng KW, Archbold L, Lau WM. Building Otto: An open-source Franz diffusion cell autosampler for automating in vitro skin permeation studies. HardwareX. 2026;25:e00735. doi:10.1016/j.ohx.2025.e00735

BibTeX
@article{Ng2026,
  author = {Ng, Keng Wooi and Archbold, Liam and Lau, Wing Man},
  title = {Building Otto: An open-source Franz diffusion cell autosampler for automating in vitro skin permeation studies},
  journal = {HardwareX},
  year = {2026},
  volume = {25},
  pages = {e00735},
  doi = {10.1016/j.ohx.2025.e00735}
}
Kostenlos starten →