EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Open-source design of low-cost sensorised elastic actuators for collaborative prosthetics and orthotics

Filippo Sanfilippo, Martin Økter, Jørgen Dale, Hua Minh Tuan, Muhammad Hamza Zafar, Morten Ottestad

HardwareX · 2024-09 · 19 · e00564

DOI: 10.1016/j.ohx.2024.e00564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift HardwareX, 2024-09. Verfasst von Filippo Sanfilippo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Sciences, University of Agder (UiA), Jon Lilletuns vei 9, Grimstad, NO-4879, Norway. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EEA Grants and Norway Grants, Universitetet i Agder.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Collaborative robots, or cobots, have become popular due to their ability to safely operate alongside humans in shared environments. These robots use compliant actuators as a key design element to prevent damage during unintended collisions. In prosthetic and orthotic applications, compliant actuators are crucial for ensuring user safety and comfort. However, most compliant cobots for these applications are excessively expensive and complex to construct. Our study introduces an innovative, cost-effective, and sensorised elastic actuator design tailored for prosthetics and orthotics. The design uses a modular approach and leverages 3D printing technology for rapid customisation, enabling efficient and affordable fabrication. Both hardware and software components are open-source, facilitating unrestricted access for students, researchers, and practitioners. Our design supports impedance and admittance control techniques, enhancing the system's capabilities. Validation results show a standard deviation of 9.67 Nm between calculated and measured torque in impedance control and 0.2563 radians between calculated and measured angles in admittance control. This allows for improved adaptability to varying operational requirements in prosthetics and orthotics. By introducing this educational framework encompassing a low-cost, sensorised elastic actuator design, we aim to address the need for accessible solutions in the field of collaborative robotics for prosthetics and orthotics.

Schlagwörter

Stichwörter der Autor:innen

CobotsElastic jointOpen-sourceOrthoticsProsthetics

Autor:innen und Institutionen

  • Department of Engineering Sciences, University of Agder (UiA), Jon Lilletuns vei 9, Grimstad, NO-4879, Norway.

Förderung

  • EEA Grants and Norway Grants
  • Universitetet i Agder

Zitieren

APA

Sanfilippo, F., Økter, M., Dale, J., Tuan, H. M., Zafar, M. H., & Ottestad, M. (2024). Open-source design of low-cost sensorised elastic actuators for collaborative prosthetics and orthotics. HardwareX, 19, e00564. https://doi.org/10.1016/j.ohx.2024.e00564

Vancouver

Sanfilippo F, Økter M, Dale J, Tuan HM, Zafar MH, Ottestad M. Open-source design of low-cost sensorised elastic actuators for collaborative prosthetics and orthotics. HardwareX. 2024;19:e00564. doi:10.1016/j.ohx.2024.e00564

BibTeX
@article{Sanfilippo2024,
  author = {Sanfilippo, Filippo and Økter, Martin and Dale, Jørgen and Tuan, Hua Minh and Zafar, Muhammad Hamza and Ottestad, Morten},
  title = {Open-source design of low-cost sensorised elastic actuators for collaborative prosthetics and orthotics},
  journal = {HardwareX},
  year = {2024},
  volume = {19},
  pages = {e00564},
  doi = {10.1016/j.ohx.2024.e00564}
}
Kostenlos starten →