Design and testing of fabric-based portable soft exoskeleton glove for hand grasping assistance in daily activity
HardwareX · 2024-06 · 18 · e00537
DOI: 10.1016/j.ohx.2024.e00537 ↗Kurz gefasst
Fachartikel in der Zeitschrift HardwareX, 2024-06. Verfasst von Rifky Ismail und 5 weiteren Autor:innen. Beteiligte Einrichtung: Depertment of Mechanical Engineering, Faculty of Engineering, Diponegoro University, Semarang, Indonesia. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Hand exoskeleton robots have been developed as rehabilitation robots and assistive devices. Based on the material used, they can be soft or hard exoskeletons. Soft materials such as fabric can be used as a component of the wearable robot to increase comfortability. In this paper, we proposed an affordable soft hand exoskeleton based on fabric and motor-tendon actuation for hand flexion/extension motion assistance in daily activities. On-off control and PI compensator were implemented to regulate finger flexion and extension of the soft exoskeleton. The controllers were embedded into a microcontroller using Simulink software. The input signal command comes from the potentiometer and electromyography (EMG) sensor to drive the flexion/extension movement. Based on the experiments, the proposed controller successfully controlled the exoskeleton hand to facilitate a user in grasping various objects. The proposed soft hand exoskeleton is lightweight, comfortable, portable, and affordable, making it easily manufactured using available hardware and open-source code. The developed soft exoskeleton is a potential assistive device for a person who lost the ability to grasp objects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Depertment of Mechanical Engineering, Faculty of Engineering, Diponegoro University, Semarang, Indonesia.
- Center for Biomechanics Biomaterials Biomechatronics and Biosignal Processing (CBIOM3S) Diponegoro University, Semarang, Indonesia.
- Professional Education of Engineers, Faculty of Engineering, Diponegoro University, Semarang, Indonesia.
- Graduate School of Engineering, Mechanical Engineering Department, Osaka University, Suita, Japan.
Zitieren
APA
Ismail, R., Ariyanto, M., Setiawan, J. D., Hidayat, T., Paryanto, & Nuswantara, L. K. (2024). Design and testing of fabric-based portable soft exoskeleton glove for hand grasping assistance in daily activity. HardwareX, 18, e00537. https://doi.org/10.1016/j.ohx.2024.e00537
Vancouver
Ismail R, Ariyanto M, Setiawan JD, Hidayat T, Paryanto, Nuswantara LK. Design and testing of fabric-based portable soft exoskeleton glove for hand grasping assistance in daily activity. HardwareX. 2024;18:e00537. doi:10.1016/j.ohx.2024.e00537
BibTeX
@article{Ismail2024,
author = {Ismail, Rifky and Ariyanto, Mochammad and Setiawan, Joga D and Hidayat, Taufik and Paryanto and Nuswantara, Limbang K},
title = {Design and testing of fabric-based portable soft exoskeleton glove for hand grasping assistance in daily activity},
journal = {HardwareX},
year = {2024},
volume = {18},
pages = {e00537},
doi = {10.1016/j.ohx.2024.e00537}
}
EUVIMED