EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Affordable lab-scale electrospinning setup with interchangeable collectors for targeted fiber formation

Alexi Switz, Aditi Mishra, Katrina Jabech, Anamika Prasad

HardwareX · 2024-03 · 17 · e00501

DOI: 10.1016/j.ohx.2023.e00501 ↗

Kurz gefasst

Fachartikel in der Zeitschrift HardwareX, 2024-03. Verfasst von Alexi Switz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Florida International University, Miami, FL, United States. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIGMS NIH HHS, National Science Foundation, National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electrospinning method is increasingly in demand due to its capability to produce fibers in the nanometer to micrometer range, with applications in diverse fields including biomedical, filtration, energy storage, and sensing. Many of these applications demand control over fiber layout and diameter. However, a standard flat plate collector yields random fibers with limited control over diameter and density. Other viable solutions offering a higher level of control are either scarce or substantially expensive, impeding the accessibility of this vital technique. This study addresses the challenge by designing an affordable laboratory-scale electrospinning setup with interchangeable collectors, enabling the creation of targeted fibers from random, aligned, and coiled. The collectors include the standard flat plate and two additional designs, which are a rotating drum and a spinneret tip collector. The rotating drum collector has adjustable speed control to collect aligned fibers and exhibits stability even at high rotational speeds. The spinneret tip collector was designed to produce helically coiled fibers. The setup was validated by directed fiber formation using polycaprolactone (PCL), a biodegradable and FDA-approved polymer. Overall, the uniqueness of the design lies in its affordability, modifiability, and replicability using readily available materials, thus extending the reach of the electrospinning technique.

Schlagwörter

Stichwörter der Autor:innen

Coiled fiberDirected fiberElectrospinningRotating drumTissue engineering

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Florida International University, Miami, FL, United States.
  • Department of Mechanical and Materials Engineering, Florida International University, Miami, FL, United States.

Förderung

  • NIGMS NIH HHS
  • National Science Foundation
  • National Institutes of Health
  • U.S. Department of Defense

Zitieren

APA

Switz, A., Mishra, A., Jabech, K., & Prasad, A. (2024). Affordable lab-scale electrospinning setup with interchangeable collectors for targeted fiber formation. HardwareX, 17, e00501. https://doi.org/10.1016/j.ohx.2023.e00501

Vancouver

Switz A, Mishra A, Jabech K, Prasad A. Affordable lab-scale electrospinning setup with interchangeable collectors for targeted fiber formation. HardwareX. 2024;17:e00501. doi:10.1016/j.ohx.2023.e00501

BibTeX
@article{Switz2024,
  author = {Switz, Alexi and Mishra, Aditi and Jabech, Katrina and Prasad, Anamika},
  title = {Affordable lab-scale electrospinning setup with interchangeable collectors for targeted fiber formation},
  journal = {HardwareX},
  year = {2024},
  volume = {17},
  pages = {e00501},
  doi = {10.1016/j.ohx.2023.e00501}
}
Kostenlos starten →