EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization experiment on eccentric lapping of cylindrical rollers

Jia Su, Julong Yuan, Sen Zhang, Binghai Lv

Nanotechnology and Precision Engineering · 2018

DOI: 10.1016/j.npe.2018.09.004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanotechnology and Precision Engineering, 2018. Verfasst von Jia Su und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Zhejiang Provincial Science and Technology Department.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cylindrical rollers are important elements of bearings, and their machining accuracy and consistency affect the bearing quality. Using a GCr15 cylindrical roller of Φ11 × 12 as the processing object in this study, the effects of loading pressure, abrasive concentration, and speed combination on cylindrical roller machining precision were investigated using the orthogonal experimental design method on a double-side eccentric pendulum lapping and polishing machine. The machining parameters of the lapping stage were optimized, and the lapping optimal process parameters were determined by S/N response analysis and analysis of variance (ANOVA). The results show that when the experiment was optimized using loading pressure of 10 N/roller, abrasive concentration (3000#Al2O3) of 20.0 wt%, and rotational speed combination, the material removal rate (MRR) of cylindrical roller reached 0.0896 μm/min; the average roughness of the batch decreased from 0.056 μm to 0.027 μm, 51.8% lower than the original batch average roughness, and the deviation decreased from the initial 0.022 μm to 0.014 μm; the batch average roundness error decreased from 0.47 μm to 0.28 μm, 40.4% lower than the original batch average roundness error, and the deviation decreased from the initial 0.19 μm to 0.038 μm; and the batch average diameter variation decreased from 4.5 μm to about 3.6 μm, 20% lower than the original batch average diameter variation. The double-side eccentric lapping of cylinder rollers does not only lead to improvement in the surface quality and shape accuracy of rollers, but also improvement in the batch consistency.

Förderung

  • National Natural Science Foundation of China
  • Zhejiang Provincial Science and Technology Department

Zitieren

APA

Su, J., Yuan, J., Zhang, S., & Lv, B. (2018). Optimization experiment on eccentric lapping of cylindrical rollers. Nanotechnology and Precision Engineering. https://doi.org/10.1016/j.npe.2018.09.004

Vancouver

Su J, Yuan J, Zhang S, Lv B. Optimization experiment on eccentric lapping of cylindrical rollers. Nanotechnology and Precision Engineering. 2018. doi:10.1016/j.npe.2018.09.004

BibTeX
@article{Su2018,
  author = {Su, Jia and Yuan, Julong and Zhang, Sen and Lv, Binghai},
  title = {Optimization experiment on eccentric lapping of cylindrical rollers},
  journal = {Nanotechnology and Precision Engineering},
  year = {2018},
  doi = {10.1016/j.npe.2018.09.004}
}
Kostenlos starten →