EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Machine learning-based prediction of bushing dimensions, surface roughness and induced temperature during friction drilling of pre-heated A356 aluminum alloy

Mahmoud Khedr, Ahmed Abdalkareem, Amr Monier, Rasha Afify, Tamer S. Mahmoud, Antti Järvenpää

Materials Today Communications · 2025-04 · 45 · 112420

DOI: 10.1016/j.mtcomm.2025.112420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Today Communications, 2025-04. Verfasst von Mahmoud Khedr und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the application of machine learning algorithms, specifically Random Forest Regressor (RFR) and Gradient Boosting Regressor (GBR), to predict key outcomes of the friction drilling of A356 aluminum alloy. Optimizing process parameters such as rotational speed (RS), feed rate (FR), and preheat temperature (PH) is critical to achieve high-quality bushings during friction drilling. The study focused on predicting bush height ( ha ), thickness ( t ), surface roughness ( Ra ), and the induced temperature at workpiece/drilling-tool interface ( T ) through a dataset consisting of 27 experiments. The results showed that RS and PH had a significant influence on ha and T , with higher values of both parameters leading to increased bush height and induced temperature. Nevertheless, FR demonstrated a weaker effect on these responses but had a more pronounced impact on t and Ra . Feature importance analysis revealed that RS and PH were the most critical parameters for optimizing the friction drilling process, while FR had a lower effect. Additionally, the GBR model outperformed the RFR model in predicting ha , t , and Ra , providing more accurate results for these dimensions. Whereas the RFR exhibited a better behavior in predicting T , demonstrating the machine learning potential to enhance precision of the formed bushings.

Zitieren

APA

Khedr, M., Abdalkareem, A., Monier, A., Afify, R., Mahmoud, T. S., & Järvenpää, A. (2025). Machine learning-based prediction of bushing dimensions, surface roughness and induced temperature during friction drilling of pre-heated A356 aluminum alloy. Materials Today Communications, 45, 112420. https://doi.org/10.1016/j.mtcomm.2025.112420

Vancouver

Khedr M, Abdalkareem A, Monier A, Afify R, Mahmoud TS, Järvenpää A. Machine learning-based prediction of bushing dimensions, surface roughness and induced temperature during friction drilling of pre-heated A356 aluminum alloy. Materials Today Communications. 2025;45:112420. doi:10.1016/j.mtcomm.2025.112420

BibTeX
@article{Khedr2025,
  author = {Khedr, Mahmoud and Abdalkareem, Ahmed and Monier, Amr and Afify, Rasha and Mahmoud, Tamer S. and Järvenpää, Antti},
  title = {Machine learning-based prediction of bushing dimensions, surface roughness and induced temperature during friction drilling of pre-heated A356 aluminum alloy},
  journal = {Materials Today Communications},
  year = {2025},
  volume = {45},
  pages = {112420},
  doi = {10.1016/j.mtcomm.2025.112420}
}
Kostenlos starten →