EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Polydopamine-functionalized calcium-deficient hydroxyapatite 3D-printed scaffold with sustained doxorubicin release for synergistic chemo-photothermal therapy of osteosarcoma and accelerated bone regeneration

Lu Wang, Zihan Dai, Jianqiang Bi, Yunzhen Chen, Ziyu Wang, Zhenqian Sun, Zhongjie Ji, Hongliang Wang, Yan Zhang, Limei Wang, Junjie Mao, Junxing Yang

Materials Today Bio · 2024-12 · 29 · 101253

DOI: 10.1016/j.mtbio.2024.101253 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Today Bio, 2024-12. Verfasst von Lu Wang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, 250061, PR Chin…. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Key Technology Research and Development Program of Shandong, Taishan Industry Leading Talents.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interior bone-tissue regeneration and rapid tumor recurrence post-resection are critical challenges in osteosarcoma and other bone cancers. Conventional bone tissue engineering scaffolds lack inhibitory effects on bone tumor recurrence. Herein, multifunctional scaffolds (named DOX/PDA@CDHA) were designed through the spontaneous polymerization of Dopamine (PDA) on the surface of Calcium Deficient Hydroxyapatite (CDHA) scaffolds, followed by in situ loading of the chemotherapeutic drug Doxorubicin (DOX). The PDA coating endowed the scaffolds with significant photothermal properties, while the gradual release of DOX provided an effective chemotherapeutic effect. The on-demand release of DOX at tumor sites, triggered by dual stimulation (near-infrared (NIR) light and the acidic pH typical of tumor microenvironments), specifically targets cancer cells, thereby mitigating systemic side effects. These unique characteristics facilitated effective osteosarcoma eradication both in vitro and in vivo. Moreover, the scaffold's composition, which mimics the mineral phase of natural bone and is enhanced by PDA's biocompatibility, promotes critical osteogenic and angiogenic processes. This facilitates not only tumor eradication but also the regeneration of healthy bone tissue. Collectively, this study presents a potent candidate for the regeneration of bone defects induced by osteosarcoma.

Schlagwörter

Stichwörter der Autor:innen

AntitumorBone regenerationCalcium-deficient hydroxyapatiteDoxorubicinPhotothermal/chemotherapyPolydopamine

Autor:innen und Institutionen

  • Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, 250061, PR China.
  • Schools of Materials Science and Engineering, Shandong University, Jinan, 250061, PR China.
  • Department of Orthopedics, Qilu Hospital of Shandong University, #107 Wenhuaxi Road, Jinan, 250061, PR China.
  • Cheeloo College of Medicine, Shandong University, Jinan, 250061, PR China.
  • Department of Orthopaedics, Peking University Third Hospital, Beijing, 100191, PR China.
  • Advanced Medical Research Institute/Translational Medicine Core Facility of Advanced Medical Research Institute, Shandong University, PR China.

Förderung

  • Key Technology Research and Development Program of Shandong
  • Taishan Industry Leading Talents

Zitieren

APA

Wang, L., Dai, Z., Bi, J., Chen, Y., Wang, Z., Sun, Z., Ji, Z., Wang, H., Zhang, Y., Wang, L., Mao, J., & Yang, J. (2024). Polydopamine-functionalized calcium-deficient hydroxyapatite 3D-printed scaffold with sustained doxorubicin release for synergistic chemo-photothermal therapy of osteosarcoma and accelerated bone regeneration. Materials Today Bio, 29, 101253. https://doi.org/10.1016/j.mtbio.2024.101253

Vancouver

Wang L, Dai Z, Bi J, Chen Y, Wang Z, Sun Z, et al. Polydopamine-functionalized calcium-deficient hydroxyapatite 3D-printed scaffold with sustained doxorubicin release for synergistic chemo-photothermal therapy of osteosarcoma and accelerated bone regeneration. Materials Today Bio. 2024;29:101253. doi:10.1016/j.mtbio.2024.101253

BibTeX
@article{Wang2024,
  author = {Wang, Lu and Dai, Zihan and Bi, Jianqiang and Chen, Yunzhen and Wang, Ziyu and Sun, Zhenqian and Ji, Zhongjie and Wang, Hongliang and Zhang, Yan and Wang, Limei and Mao, Junjie and Yang, Junxing},
  title = {Polydopamine-functionalized calcium-deficient hydroxyapatite 3D-printed scaffold with sustained doxorubicin release for synergistic chemo-photothermal therapy of osteosarcoma and accelerated bone regeneration},
  journal = {Materials Today Bio},
  year = {2024},
  volume = {29},
  pages = {101253},
  doi = {10.1016/j.mtbio.2024.101253}
}
Kostenlos starten →