Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy
Micron · 2023-08 · 171 · 103472
DOI: 10.1016/j.micron.2023.103472 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micron, 2023-08. Verfasst von Olutayo Adegoke und 7 weiteren Autor:innen. Beteiligte Einrichtung: Siemens Energy, 61283 Finspång, Sweden. Electronic address: olutayo.adegoke@siemens-energy.com. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 41 Literaturangaben.
Abstract (Originalsprache)
Atom probe tomography (APT) was utilized to supplement scanning electron microscopy (SEM) characterization of a precipitation strengthening nickel-based superalloy, Alloy 247LC, processed by laser powder bed fusion (L-PBF). It was observed that the material in the as-built condition had a relatively high strength. Using both SEM and APT, it was concluded that the high strength was not attributed to the typical precipitation strengthening effect of γ'. In the absence of γ' it could be reasonably inferred that the numerous black dots observed in the cells/grains with SEM were dislocations and as such should be contributing significantly to the strengthening. Thus, the current investigation demonstrated that relatively high strengthening can be attained in L-PBF even in the absence of precipitated γ'. Even though γ' was not precipitated, the APT analysis displayed a nanometer scale partitioning of Cr that could be contributing to the strengthening. After heat-treatment, γ' was precipitated and it demonstrated the expected high strengthening behavior. Al, Ta and Ti partitioned to γ'. The strong partitioning of Ta in γ' is indicative that the element, together with Al and Ti, was contributing to the strain-age cracking occurring during heat-treatment. Cr, Mo and Co partitioned to the matrix γ phase. Hf, Ta, Ti and W were found in the carbides corroborating previous reports that they are MC.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Siemens Energy, 61283 Finspång, Sweden. Electronic address: olutayo.adegoke@siemens-energy.com.
- Department of Engineering Science, University West, 46186 Trollhättan, Sweden; FEV Sverige AB, Nohabgatan 12A, 46153 Trollhättan, Sweden.
- Department of Physics, Chalmers University of Technology, 41296 Gothenburg, Sweden.
- Siemens Energy, 61283 Finspång, Sweden.
- Department of Engineering Science, University West, 46186 Trollhättan, Sweden.
- Department of Engineering Science, University West, 46186 Trollhättan, Sweden; Sandvik Additive Manufacturing, 81181 Sandviken, Sweden.
Zitieren
APA
Adegoke, O., Kumara, C., Thuvander, M., Deirmina, F., Andersson, J., Brodin, H., Harlin, P., & Pederson, R. (2023). Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy. Micron, 171, 103472. https://doi.org/10.1016/j.micron.2023.103472
Vancouver
Adegoke O, Kumara C, Thuvander M, Deirmina F, Andersson J, Brodin H, et al. Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy. Micron. 2023;171:103472. doi:10.1016/j.micron.2023.103472
BibTeX
@article{Adegoke2023,
author = {Adegoke, Olutayo and Kumara, Chamara and Thuvander, Mattias and Deirmina, Faraz and Andersson, Joel and Brodin, Håkan and Harlin, Peter and Pederson, Robert},
title = {Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy},
journal = {Micron},
year = {2023},
volume = {171},
pages = {103472},
doi = {10.1016/j.micron.2023.103472}
}
EUVIMED