EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dilute Zn alloying in biodegradable Mg wires: microstructure, mechanical performance, and degradation behavior

Jiří Ryjáček, Leonard Hlodák, Jiří Liška, Jan Pinc, Tomáš Herma, Karel Tesař

Materials & Design · 2026-11 · 271 · 117246

DOI: 10.1016/j.matdes.2026.117246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials & Design, 2026-11. Verfasst von Jiří Ryjáček und 5 weiteren Autor:innen. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education Youth and Sports of the Czech Republic, Czech Technical University in Prague, Ministry of the Environment of the Czech Republic.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dilute Mg-Zn wires are of great interest for biodegradable small-bone fixation, as magnesium degradation can support bone-related processes, while low zinc additions may provide biological benefits without compromising biocompatibility. In this work, the influence of Zn content below the room-temperature solubility limit was assessed in Mg-Zn wires intended for resorbable implant applications. Mg-0.4Zn, Mg-0.6Zn, Mg-0.8Zn, and Mg-1.5Zn alloys were processed by single-step direct hot extrusion into thin wires and characterized by correlative microstructural analysis, tensile testing, bending experiments, and in vitro degradation. All compositions achieved a recrystallized fine equiaxed grain size of 5.0-5.9 um and exhibited ultimate tensile strengths of 246-256 MPa with elongations of 23-28 %. In these thin wires, Zn content had only a limited effect on grain size, tensile properties, and bending behavior, although lower-Zn alloys showed a pronounced sharp yield point. Bending was governed mainly by extrusion texture and preserved reversible plasticity through twinning and detwinning. Simulated body fluid caused rapid localized degradation and loss of mechanical integrity within 7 days, while the biologically more relevant DMEM-based medium better reflected the expected in vivo response. Together, these findings support dilute Mg-Zn wires as a simple material platform for the development of future resorbable bone fixation devices.

Förderung

  • Ministry of Education Youth and Sports of the Czech Republic
  • Czech Technical University in Prague
  • Ministry of the Environment of the Czech Republic
  • Czech Science Foundation

Zitieren

APA

Ryjáček, J., Hlodák, L., Liška, J., Pinc, J., Herma, T., & Tesař, K. (2026). Dilute Zn alloying in biodegradable Mg wires: microstructure, mechanical performance, and degradation behavior. Materials & Design, 271, 117246. https://doi.org/10.1016/j.matdes.2026.117246

Vancouver

Ryjáček J, Hlodák L, Liška J, Pinc J, Herma T, Tesař K. Dilute Zn alloying in biodegradable Mg wires: microstructure, mechanical performance, and degradation behavior. Materials & Design. 2026;271:117246. doi:10.1016/j.matdes.2026.117246

BibTeX
@article{Ryjek2026,
  author = {Ryjáček, Jiří and Hlodák, Leonard and Liška, Jiří and Pinc, Jan and Herma, Tomáš and Tesař, Karel},
  title = {Dilute Zn alloying in biodegradable Mg wires: microstructure, mechanical performance, and degradation behavior},
  journal = {Materials & Design},
  year = {2026},
  volume = {271},
  pages = {117246},
  doi = {10.1016/j.matdes.2026.117246}
}
Kostenlos starten →