EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integrating stent design and microstructural characterization to improve clinical outcomes of bioresorbable stents

Francesc Canalejo-Codina, Marta Pegueroles iD, Andrés A García-Granada iD, Jordi Martorell iD, Elazer R Edelman iD, Mercedes Balcells

Materials & Design · 2025-12 · 260 · 115013

DOI: 10.1016/j.matdes.2025.115013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials & Design, 2025-12. Verfasst von Francesc Canalejo-Codina und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NHLBI NIH HHS, Gobierno de Espana Ministerio de Ciencia e Innovacion, Daniel Bravo Andreu Private Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bioresorbable stents were conceived to revolutionize the treatment of cardiovascular diseases. However, their significant benefits were overshadowed by a higher clotting rate compared to permanent implants. This clinical failure is linked to strain-induced microstructural disruptions during fabrication and implantation, resulting in heterogeneous loss of structural integrity. The non-gradual loss of support, combined with faster, localized polymer deterioration, directly contributes to the clinical failure observed in bioresorbable stents. Leveraging this understanding marks a significant advancement toward their safe reintroduction. However, the extent to which a stent's stress distribution interacts with the polymer's microstructure remains understudied. This study advances the existing knowledge on bioresorbable stents by establishing a framework for comprehending the microstructural properties that emerge from stent fabrication and implantation, ultimately aiming to improve clinical outcomes. The analysis addresses structural degradation and thrombogenicity of the devices, linking these aspects to the microstructural characteristics of various poly(L-lactide-co-ε-caprolactone) stent configurations. The configuration with the polymer microstructure tailored to the stress profile of the stent design presented the best performance. These findings emphasize the critical need to align the as-manufactured material properties with the stress distribution during implantation and provide powerful tools and strategies to cast bioresorbable stents that outperform current cardiovascular stents.

Schlagwörter

Stichwörter der Autor:innen

Bioresorbable stentDegradationDesignManufacturingMicrostructureThrombosis

Autor:innen und Institutionen

  • Institute for Medical Engineering and Science, Massachusetts Institute of Technology, Cambridge, MA, USA.
  • Vascular Engineering and Applied Biomedicine Group (GEVAB), IQS School of Engineering, Universitat Ramon Llull, Barcelona, Spain.
  • Industrial Product Engineering Group (GEPI), IQS School of Engineering, Universitat Ramon Llull, Barcelona, Spain.
  • Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Engineering, Center for Research in Multiscale Science and Engineering (CCEM) and Institute for Research and Innovation in Hea…

ORCID-Profile: Marta Pegueroles, Andrés A García-Granada, Jordi Martorell, Elazer R Edelman

Förderung

  • NHLBI NIH HHS
  • Gobierno de Espana Ministerio de Ciencia e Innovacion
  • Daniel Bravo Andreu Private Foundation
  • Ministerio de Ciencia e Innovación
  • Agencia Estatal de Investigación
  • National Heart Lung and Blood Institute

Zitieren

APA

Canalejo-Codina, F., Pegueroles, M., García-Granada, A. A., Martorell, J., Edelman, E. R., & Balcells, M. (2025). Integrating stent design and microstructural characterization to improve clinical outcomes of bioresorbable stents. Materials & Design, 260, 115013. https://doi.org/10.1016/j.matdes.2025.115013

Vancouver

Canalejo-Codina F, Pegueroles M, García-Granada AA, Martorell J, Edelman ER, Balcells M. Integrating stent design and microstructural characterization to improve clinical outcomes of bioresorbable stents. Materials & Design. 2025;260:115013. doi:10.1016/j.matdes.2025.115013

BibTeX
@article{CanalejoCodina2025,
  author = {Canalejo-Codina, Francesc and Pegueroles, Marta and García-Granada, Andrés A and Martorell, Jordi and Edelman, Elazer R and Balcells, Mercedes},
  title = {Integrating stent design and microstructural characterization to improve clinical outcomes of bioresorbable stents},
  journal = {Materials & Design},
  year = {2025},
  volume = {260},
  pages = {115013},
  doi = {10.1016/j.matdes.2025.115013}
}
Kostenlos starten →