Understanding process parameter-induced variability for tailoring precipitation behavior, grain structure, and mechanical properties of Al-Mg-Si-Mn alloy during solid-state additive manufacturing
Materials & Design · 2024-09 · 245 · 113238
DOI: 10.1016/j.matdes.2024.113238 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials & Design, 2024-09. Verfasst von Abhishek Pariyar und 6 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UK Research and Innovation, UKRI MRC.
Abstract (Originalsprache)
Additive friction stir deposition (AFSD), a solid-state additive manufacturing technique, has excellent industrial application potential, particularly for Al alloys. However, in-depth process parameter-microstructure-property correlations are lacking, especially regarding precipitation behavior. In this work, AFSD of Al-Mg-Si-Mn alloy with various process parameter combinations was performed to understand the variation (by ~ 70 %) in the nano/microhardness, concerning the precipitation behavior. The low nano/microhardness sample exhibited dissolution of the β” strengthening phase. However, higher nano/microhardness samples showed varying microstructural features with high dislocation density owing to fine-scale pre-β” precipitation and another sample possessed inhomogeneous β” phase distribution and β’ precipitation at the grain boundaries, thus exhibiting reprecipitation during AFSD. The variation in the grain structure was such that the high nano/ microhardness samples exhibited large, elongated grains (~11 to 13 µ m) and low recrystallization fractions (~16 – 18 %) suggesting a predominantly non-recrystallized microstructure. Conversely, the lowest nano/microhardness sample exhibited the smallest grain size (~5 µ m) and, a higher recrystallization fraction (~42 %). These findings demonstrate extensive variation in the precipitation behavior, grain structure, and mechanical properties due to the process parameters. Future applications can leverage this knowledge to tailor the microstructure and mechanical properties based on the identified process parameter combinations.
Förderung
- UK Research and Innovation
- UKRI MRC
Zitieren
APA
Pariyar, A., Yasa, E., Sharman, A., Perugu, C. S., Yuan, L., Hughes, J., & Guan, D. (2024). Understanding process parameter-induced variability for tailoring precipitation behavior, grain structure, and mechanical properties of Al-Mg-Si-Mn alloy during solid-state additive manufacturing. Materials & Design, 245, 113238. https://doi.org/10.1016/j.matdes.2024.113238
Vancouver
Pariyar A, Yasa E, Sharman A, Perugu CS, Yuan L, Hughes J, et al. Understanding process parameter-induced variability for tailoring precipitation behavior, grain structure, and mechanical properties of Al-Mg-Si-Mn alloy during solid-state additive manufacturing. Materials & Design. 2024;245:113238. doi:10.1016/j.matdes.2024.113238
BibTeX
@article{Pariyar2024,
author = {Pariyar, Abhishek and Yasa, Evren and Sharman, Adrian and Perugu, Chandra S. and Yuan, Liang and Hughes, James and Guan, Dikai},
title = {Understanding process parameter-induced variability for tailoring precipitation behavior, grain structure, and mechanical properties of Al-Mg-Si-Mn alloy during solid-state additive manufacturing},
journal = {Materials & Design},
year = {2024},
volume = {245},
pages = {113238},
doi = {10.1016/j.matdes.2024.113238}
}
EUVIMED