EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: In-situ characterisation and phase-field modelling

A.D. Boccardo, Z. Zou, M. Simonelli, M. Tong, J. Segurado, S.B. Leen, D. Tourret

Materials & Design · 2024-05 · 241 · 112949

DOI: 10.1016/j.matdes.2024.112949 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials & Design, 2024-05. Verfasst von A.D. Boccardo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 125 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Nottingham, Gobierno de España Ministerio de Ciencia e Innovación, Ministerio de Ciencia e Innovación.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $\alpha'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $\alpha'$ phase decomposes into equilibrium $\alpha+\beta$ structures, while possibly conserving microstructural features and length scales of the $\alpha'$ lath structure. Here, we combine experimental and computational methods to explore the kinetics of martensite decomposition. Experiments rely on in-situ characterisation (electron microscopy and diffraction) during multi-step heat treatment from 400$^{\circ}$C up to the alloy $\beta$-transus temperature (995$^{\circ}$C). Computational simulations rely on an experimentally-informed computationally-efficient phase-field model. Experiments confirmed that as-built microstructures were fully composed of martensitic $\alpha'$ laths. During martensite decomposition, nucleation of the $\beta$ phase occurs primarily along $\alpha'$ lath boundaries, with traces of $\beta$ nucleation along crystalline defects. Phase-field results, using electron backscatter diffraction maps of as-built microstructures as initial conditions, are compared directly with in-situ characterisation data. Experiments and simulations confirmed that, while full decomposition into stable $\alpha+\beta$ phases may be complete at 650$^{\circ}$C provided sufficient annealing time, visible morphological evolution of the microstructure was only observed for $T\geq\,$700$^{\circ}$C, without modification of the prior-$\beta$ grain structure.

Förderung

  • University of Nottingham
  • Gobierno de España Ministerio de Ciencia e Innovación
  • Ministerio de Ciencia e Innovación
  • Science Foundation Ireland
  • European Commission

Zitieren

APA

Boccardo, A., Zou, Z., Simonelli, M., Tong, M., Segurado, J., Leen, S., & Tourret, D. (2024). Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: In-situ characterisation and phase-field modelling. Materials & Design, 241, 112949. https://doi.org/10.1016/j.matdes.2024.112949

Vancouver

Boccardo A, Zou Z, Simonelli M, Tong M, Segurado J, Leen S, et al. Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: In-situ characterisation and phase-field modelling. Materials & Design. 2024;241:112949. doi:10.1016/j.matdes.2024.112949

BibTeX
@article{Boccardo2024,
  author = {Boccardo, A.D. and Zou, Z. and Simonelli, M. and Tong, M. and Segurado, J. and Leen, S.B. and Tourret, D.},
  title = {Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: In-situ characterisation and phase-field modelling},
  journal = {Materials & Design},
  year = {2024},
  volume = {241},
  pages = {112949},
  doi = {10.1016/j.matdes.2024.112949}
}
Kostenlos starten →