EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Improving the 3D printing performance of corn starch gels by maltogenic amylase treatment under annealing conditions

Yufeng Sun, Qianqian Wang, Zifan Zhao

LWT · 2026-10 · 258 · 119880

DOI: 10.1016/j.lwt.2026.119880 ↗

Kurz gefasst

Fachartikel in der Zeitschrift LWT, 2026-10. Verfasst von Yufeng Sun und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Qilu University of Technology, Dezhou University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The low cost, abundance, and shear-thinning nature of starch gels make them promising inks for extrusion-based 3D food printing; nevertheless, amylose retrogradation raises the yield stress, adversely affecting extrudability and printing accuracy. In this study, maltogenic amylase (AM) treatment was applied at annealing temperatures (30-65 °C) to tailor the molecular structure of corn starch and improve its printability. AM treatment markedly reduced amylose content and modified the amylopectin chain-length distribution. Moderate annealing further promoted the transition of short amylopectin chains (DP 6–12) toward medium-to-long chains, thereby regulating gel network formation. These structural changes directly influenced the rheological behavior and printing performance of starch gels. With increasing annealing temperature, AM hydrolysis weakened the amylose-dominated network, decreased yield stress, and improved extrusion continuity. Meanwhile, the increased amylopectin proportion enhanced water retention and adhesiveness, facilitating smoother extrusion and stronger interlayer bonding. However, excessive annealing produced an overly compact and rigid gel network, which hindered extrusion and reduced printing quality. Among all samples, starch treated at 50 °C exhibited the lowest yield stress, optimal viscoelasticity, stable extrusion behavior, and the highest printing accuracy of 82.60%. Overall, AM-assisted modification at annealing temperatures provides an effective strategy for developing starch-based gels with improved extrudability and structural fidelity for 3D food printing.

Förderung

  • Qilu University of Technology
  • Dezhou University

Zitieren

APA

Sun, Y., Wang, Q., & Zhao, Z. (2026). Improving the 3D printing performance of corn starch gels by maltogenic amylase treatment under annealing conditions. LWT, 258, 119880. https://doi.org/10.1016/j.lwt.2026.119880

Vancouver

Sun Y, Wang Q, Zhao Z. Improving the 3D printing performance of corn starch gels by maltogenic amylase treatment under annealing conditions. LWT. 2026;258:119880. doi:10.1016/j.lwt.2026.119880

BibTeX
@article{Sun2026,
  author = {Sun, Yufeng and Wang, Qianqian and Zhao, Zifan},
  title = {Improving the 3D printing performance of corn starch gels by maltogenic amylase treatment under annealing conditions},
  journal = {LWT},
  year = {2026},
  volume = {258},
  pages = {119880},
  doi = {10.1016/j.lwt.2026.119880}
}
Kostenlos starten →