EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-flow field analysis and optimised design of an infrared hot air dryer based on computational fluid dynamics

Mengqing Li, Lichun Zhu, Xuhai Yang, Zhihua Geng, Qian Zhang

LWT · 2026-04 · 245 · 119240

DOI: 10.1016/j.lwt.2026.119240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift LWT, 2026-04. Verfasst von Mengqing Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a computational fluid dynamics-based multi-flow field modelling method for an infrared hot air dryer. A three-dimensional airflow simulation of airflow in the distribution chamber was developed using a multi-stage turbulence device to optimise the uniformity of the velocity flow field. The optimised values of velocity inhomogeneity coefficient (E, maximum value), (E, average value), and velocity deviation ratio (M) decreased by 65.3%, 66.2%, and 50.9%, respectively, compared with the pre-optimisation values. Subsequently, a multi-fluid field-coupled model was developed for the drying chamber and was used to analyse the velocity, temperature, and humidity fields during the drying process. The optimised gradient-distributed turbulence plates performed better than the uniformly distributed turbulence plates. The maximum velocity difference was reduced from 0.22 to 0.1 m/s, and the temperature and humidity boundary layers on the material surface were effectively weakened, resulting in more uniform drying. Validation experiments for the optimised dryer were performed using jujube slices. The results demonstrated that the maximum deviation in drying time across the different material layers was 12.5%, and the appearance quality was uniform. The drying rates of the materials in different regions within the same drying layer were also consistent, with a maximum deviation of 5.08%. The results of this research provide technical support for future developments in equipment manufacturing and heat and mass transfer analysis of drying technology. • Developed multi-flow coupling model for flow simulation in infrared dryer chambers. • Model integrated velocity, temperature, vapor & moisture for accurate flow prediction. • Proposed and validated structural optimizations proving CFD multiphysics success in design.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, M., Zhu, L., Yang, X., Geng, Z., & Zhang, Q. (2026). Multi-flow field analysis and optimised design of an infrared hot air dryer based on computational fluid dynamics. LWT, 245, 119240. https://doi.org/10.1016/j.lwt.2026.119240

Vancouver

Li M, Zhu L, Yang X, Geng Z, Zhang Q. Multi-flow field analysis and optimised design of an infrared hot air dryer based on computational fluid dynamics. LWT. 2026;245:119240. doi:10.1016/j.lwt.2026.119240

BibTeX
@article{Li2026,
  author = {Li, Mengqing and Zhu, Lichun and Yang, Xuhai and Geng, Zhihua and Zhang, Qian},
  title = {Multi-flow field analysis and optimised design of an infrared hot air dryer based on computational fluid dynamics},
  journal = {LWT},
  year = {2026},
  volume = {245},
  pages = {119240},
  doi = {10.1016/j.lwt.2026.119240}
}
Kostenlos starten →