EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of dynamic stress in an acoustic black hole taper

Archie Keys, Jordan Cheer

Journal of Sound and Vibration · 2026-11 · 642 · 119927

DOI: 10.1016/j.jsv.2026.119927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sound and Vibration, 2026-11. Verfasst von Archie Keys und 1 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Academy of Engineering, Department for Science, Innovation and Technology, University of Southampton.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Acoustic Black Holes (ABHs) provide a lightweight and high-performance alternative to traditional methods for the attenuation of structural vibration. Usually implemented through a gradual reduction in the structural thickness, ABHs introduce a reduction in the local wavespeed within the ABH taper region. This results in a corresponding reduction in the wavelength of vibration, and thus increases the e ff ectiveness of passive damping treatment applied to the ABH taper. However, the ABH e ff ect inherently focuses vibrational energy into the ABH taper, resulting in high amplitude deflection of the ABH tip. This raises concerns about the level of dynamic stress within the ABH taper, which could result in a significant reduction in the useful life of the structure due to fatigue. This paper presents an investigation into the dynamic stress induced in an ABH taper used to terminate a uniform beam. A numerical analysis of dynamic stress is carried out and this links the maxima in the stress response to the modes of the structure, providing insight into the stress localisation mechanism. Following this, a parametric study explores the e ff ect of varying three key ABH geometrical design parameters on both the vibration attenuation performance, quantified via the reflection coe ffi cient, and the level of dynamic stress, highlighting the trade-o ff between these two performance metrics. Finally, experimental measurements of both the reflection coe ffi cient and the dynamic stress within a representative ABH taper are presented to validate the results of the numerical study.

Förderung

  • Royal Academy of Engineering
  • Department for Science, Innovation and Technology
  • University of Southampton
  • Engineering and Physical Sciences Research Council

Zitieren

APA

Keys, A., & Cheer, J. (2026). Analysis of dynamic stress in an acoustic black hole taper. Journal of Sound and Vibration, 642, 119927. https://doi.org/10.1016/j.jsv.2026.119927

Vancouver

Keys A, Cheer J. Analysis of dynamic stress in an acoustic black hole taper. Journal of Sound and Vibration. 2026;642:119927. doi:10.1016/j.jsv.2026.119927

BibTeX
@article{Keys2026,
  author = {Keys, Archie and Cheer, Jordan},
  title = {Analysis of dynamic stress in an acoustic black hole taper},
  journal = {Journal of Sound and Vibration},
  year = {2026},
  volume = {642},
  pages = {119927},
  doi = {10.1016/j.jsv.2026.119927}
}
Kostenlos starten →