EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An efficient model for predicting the sound radiation from a railway rail accounting for cross-section deformation

Christopher Knuth, Giacomo Squicciarini, David Thompson

Journal of Sound and Vibration · 2025-12 · 618 · 119323

DOI: 10.1016/j.jsv.2025.119323 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sound and Vibration, 2025-12. Verfasst von Christopher Knuth und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The track is the main contributor to railway rolling noise below 2 kHz. In this frequency range it is usually acceptable to represent the rail vibration using a Timoshenko beam. At higher frequencies, however, cross-section deformation occurs in the rail, which requires more complex track models. In this paper a vibroacoustic 2.5D Finite Element and Boundary Element model of a continuously supported rail is implemented for studying the effect of cross-section deformation on sound radiation. A novel interpolation strategy is developed to significantly reduce the solution time by interpolating element coefficient vectors. Results are calculated for vertical or lateral excitation applied to the rail head and comparisons are made with a Timoshenko beam model in which the cross-section remains undeformed. For vertical excitation, the sound power from both models is identical below 3 kHz, while for lateral excitation, the Timoshenko beam has differences of up to 25 dB below 200 Hz owing to the missing rail torsion and foundation eccentricity. Above 3 kHz for vertical excitation and from 1 kHz for lateral excitation, higher-order waves contribute to the sound power, causing an underestimation of up to 15 dB if the cross-section deformation is neglected. The calculated transfer functions of rail sound power per unit squared force are incorporated in a rolling noise prediction model that includes vertical and lateral dynamics. The results show that the Timoshenko beam rail underestimates the rail sound power by up to 5 dB in comparison with the 2.5D rail model in one-third octave bands.

Zitieren

APA

Knuth, C., Squicciarini, G., & Thompson, D. (2025). An efficient model for predicting the sound radiation from a railway rail accounting for cross-section deformation. Journal of Sound and Vibration, 618, 119323. https://doi.org/10.1016/j.jsv.2025.119323

Vancouver

Knuth C, Squicciarini G, Thompson D. An efficient model for predicting the sound radiation from a railway rail accounting for cross-section deformation. Journal of Sound and Vibration. 2025;618:119323. doi:10.1016/j.jsv.2025.119323

BibTeX
@article{Knuth2025,
  author = {Knuth, Christopher and Squicciarini, Giacomo and Thompson, David},
  title = {An efficient model for predicting the sound radiation from a railway rail accounting for cross-section deformation},
  journal = {Journal of Sound and Vibration},
  year = {2025},
  volume = {618},
  pages = {119323},
  doi = {10.1016/j.jsv.2025.119323}
}
Kostenlos starten →