Frequency-domain synchronization of structural health monitoring data
Journal of Sound and Vibration · 2024-02 · 571 · 118017
DOI: 10.1016/j.jsv.2023.118017 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Sound and Vibration, 2024-02. Verfasst von Kosmas Dragos und 3 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Deutsche Forschungsgemeinschaft, Institute of Research and Development in Structures and Construction, Ministério da Ciência, Tecnologia e Ensino Superior.
Abstract (Originalsprache)
Since the advent of structural health monitoring (SHM), vibration analysis has been one of the most popular strategies for yielding modal information of structures, such as eigenfrequencies and mode shapes. As a result of the relatively high sampling rates adopted in vibration analysis, obtaining accurate modal information requires absolute synchronization of structural response data. Despite the advances in sensing technologies and synchronization protocols, synchronization discrepancies in structural response data may occur due to drifting in internal clocks of independent data acquisition units. Particularly in wireless SHM, in which each wireless sensor node essentially operates as an independent data acquisition unit, mitigating clock drifting has been an area of intensive research. This paper addresses the issue of data synchronization from a physics-based perspective, aiming to add an additional synchronization check at the post-sampling stage. Specifically, a frequency-domain synchronization approach is reported, which builds upon the relationship between time lags in structural response data and the cross spectral density phase angles. Validation tests are conducted using simulations of a multi-degree-of-freedom oscillator and data collected from a full-scale road bridge, demonstrating the capability of the approach to estimate time lags between SHM data even in the presence of non-proportional damping, thus overcoming a common limitation of other synchronization methods . The frequency-domain synchronization approach is intended to complement synchronization protocols in extracting accurate modal information. the simulations with respect to the limitations of time lag estimation and to the capability of the frequency-domain synchronization approach to estimate time lags up to 300 ms with low errors. Future work will focus on automating and embedding frequency-domain synchronization approach in wireless sensor nodes. Furthermore, the favorable effect of the approach on correcting mode shapes will be examined in structures with responses in variable frequency bandwidths.
Förderung
- Deutsche Forschungsgemeinschaft
- Institute of Research and Development in Structures and Construction
- Ministério da Ciência, Tecnologia e Ensino Superior
- Fundação para a Ciência e a Tecnologia
Zitieren
APA
Dragos, K., Magalhães, F., Manolis, G. D., & Smarsly, K. (2024). Frequency-domain synchronization of structural health monitoring data. Journal of Sound and Vibration, 571, 118017. https://doi.org/10.1016/j.jsv.2023.118017
Vancouver
Dragos K, Magalhães F, Manolis GD, Smarsly K. Frequency-domain synchronization of structural health monitoring data. Journal of Sound and Vibration. 2024;571:118017. doi:10.1016/j.jsv.2023.118017
BibTeX
@article{Dragos2024,
author = {Dragos, Kosmas and Magalhães, Filipe and Manolis, George D. and Smarsly, Kay},
title = {Frequency-domain synchronization of structural health monitoring data},
journal = {Journal of Sound and Vibration},
year = {2024},
volume = {571},
pages = {118017},
doi = {10.1016/j.jsv.2023.118017}
}
EUVIMED