EUVIMEDEUVIMED entdecken
Crossref

Hydrophilic Polymer–Modified Poly(ε-caprolactone)/Hydroxyapatite Three-dimensional-Printed Scaffolds with Enhanced Hydrophilicity and Biodegradability for Regenerative Endodontic Applications

Young-Ran Kim, Ye-Seul Kim, Jin-Ho Kang, Chan Park, Bin-Na Lee

Journal of Endodontics · 2026-07 · 52 (7) · 1166-1175

DOI: 10.1016/j.joen.2026.03.014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Endodontics, 2026-07. Verfasst von Young-Ran Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Program of Biomedical Engineering, Graduate School, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea. Hauptthemen laut MEDLINE: Tissue Scaffolds, Polyesters, Durapatite, Printing, Three-Dimensional. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: Korea Ministry of Science ICT and Future Planning, Korea Ministry of Small and Medium Enterprises and Startups, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

INTRODUCTION Poly(ε-caprolactone) (PCL) is widely used as a scaffold material for tissue regeneration; however, its intrinsic hydrophobicity and slow biodegradation limit cell adhesion and tissue remodeling. This study aimed to improve the hydrophilicity and biodegradability of PCL-based scaffolds by incorporating the hydrophilic polymer poloxamer 407 (P407) while maintaining mechanical stability through hydroxyapatite (HA) reinforcement. The composite system was designed as a bioactive platform for dentin-pulp complex regeneration and other regenerative endodontic applications. METHODS Disc-shaped scaffolds with approximately 65% porosity were fabricated via fused deposition modeling-based 3D printing at varying PCL/HA/P407 ratios (P, PH, PHP1, PHP2, and PHP3). Physicochemical and biological properties-including printability, hydrophilicity, degradation, and mechanical strength-were analyzed using rheology, contact angle measurement, degradation testing, field-emission scanning electron microscopy, thermogravimetric/differential thermal analysis, compressive testing, and Fourier transform infrared spectroscopy. Human dental pulp stem cells (hDPSCs) were cultured to assess cell adhesion, proliferation, and osteo/odontogenic differentiation through alkaline phosphatase activity and alizarin red S staining. RESULTS P407 incorporation significantly enhanced scaffold hydrophilicity and degradation while maintaining mechanical strength. The optimal P407 concentration (PHP2) showed improved hDPSCs adhesion, proliferation, and mineralized matrix formation without cytotoxicity. Increased alkaline phosphatase activity and calcium deposition indicated a favorable microenvironment for early osteo/odontogenic differentiation. CONCLUSION The P407-incorporated PCL/HA composite scaffold exhibited balanced mechanical stability, enhanced hydrophilicity, and tunable biodegradability, supporting favorable hDPSCs responses. These results suggest its potential as a promising scaffold for dentin-pulp complex regeneration and broader tissue engineering applications in regenerative endodontics.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsPolyestersDurapatitePrinting, Three-DimensionalRegenerative EndodonticsHumansHydrophobic and Hydrophilic InteractionsDental PulpCell AdhesionCell ProliferationStem CellsTissue EngineeringPorosityPoloxamerBiocompatible MaterialsCell Differentiation

Stichwörter der Autor:innen

3D-printed scaffoldPoly(ε-caprolactone) (PCL)human -dental pulp stem cells (hDPSCs)hydroxyapatite (HA)poloxamer 407 (P407)regenerative endodontics

Substanzen

PolyestersDurapatitepolycaprolactonePoloxamerBiocompatible Materials

Autor:innen und Institutionen

  • Interdisciplinary Program of Biomedical Engineering, Graduate School, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea.
  • Department of Prosthodontics, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea.
  • Department of Prosthodontics, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea. Electronic address: upgradepc@hanmail.net.
  • Department of Conservative Dentistry, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea. Electronic address: bnlee13@jnu.ac.kr.

Förderung

  • Korea Ministry of Science ICT and Future Planning
  • Korea Ministry of Small and Medium Enterprises and Startups
  • National Research Foundation of Korea
  • Ministry of Science, ICT and Future Planning
  • Ministry of Health and Welfare
  • Korea Ministry of Trade Industry and Energy

Zitieren

APA

Kim, Y. R., Kim, Y. S., Kang, J. H., Park, C., & Lee, B. N. (2026). Hydrophilic Polymer–Modified Poly(ε-caprolactone)/Hydroxyapatite Three-dimensional-Printed Scaffolds with Enhanced Hydrophilicity and Biodegradability for Regenerative Endodontic Applications. Journal of Endodontics, 52(7), 1166-1175. https://doi.org/10.1016/j.joen.2026.03.014

Vancouver

Kim YR, Kim YS, Kang JH, Park C, Lee BN. Hydrophilic Polymer–Modified Poly(ε-caprolactone)/Hydroxyapatite Three-dimensional-Printed Scaffolds with Enhanced Hydrophilicity and Biodegradability for Regenerative Endodontic Applications. Journal of Endodontics. 2026;52(7):1166-1175. doi:10.1016/j.joen.2026.03.014

BibTeX
@article{Kim2026,
  author = {Kim, Young-Ran and Kim, Ye-Seul and Kang, Jin-Ho and Park, Chan and Lee, Bin-Na},
  title = {Hydrophilic Polymer–Modified Poly(ε-caprolactone)/Hydroxyapatite Three-dimensional-Printed Scaffolds with Enhanced Hydrophilicity and Biodegradability for Regenerative Endodontic Applications},
  journal = {Journal of Endodontics},
  year = {2026},
  volume = {52},
  number = {7},
  pages = {1166--1175},
  doi = {10.1016/j.joen.2026.03.014}
}
Kostenlos starten →