EUVIMEDEUVIMED entdecken
Crossref

Biocompatibility and customizability: Expanding possibilities with 3D printed guide cannulas

Rogneda B Kazanskaya, Anna N Berliand, Anna B Volnova, Alexander V Lopachev

Journal of Neuroscience Methods · 2024

DOI: 10.1016/j.jneumeth.2024.110237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Neuroscience Methods, 2024. Verfasst von Rogneda B Kazanskaya und 3 weiteren Autor:innen. Beteiligte Einrichtung: Research Center of Neurology, Volokolamskoye Shosse 80, Moscow 125367, Russia; Biological Department, Saint Petersburg State University, Universitets…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Cannula, Mice, Inbred C57BL. Die Arbeit nennt 20 Literaturangaben. Gefördert von: Russian Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: Intracerebral cannulation bypasses the blood-brain barrier, and is frequently used for targeted drug delivery to specific brain structures. Despite the availability of brain infusion kits and manual injections without cannulation, the traditional design of guide cannulas continues to be utilized in research. Several protocols describing guide cannula manufacture from stainless steel needles have been published previously. NEW METHOD: We describe a method for producing the first fully plastic guide cannula intended for intracerebroventricular injections in mice using Dental Sand A1-A2 resin and digital light processing 3D printing. RESULTS: The lack of resin neurotoxicity for primary rat cortical neuron cultures was shown. Histological evaluations performed 6 weeks after guide cannula implantation to C57/black mice show that plastic cannula are biocompatible. Microglial and astroglial reactions to plastic cannulas are reduced compared to lab-made stainless steel cannulas. Plastic cannulas are less prone to obstruction, and remained unobstructed over the course of 3 weeks of daily injections, while 50 % of stainless steel cannula became impassable by the 2 week mark. COMPARISON WITH EXISTING METHODS: These are the first published cannulas intended for applications in mice which combine the presence of usable threads, allowing dummy cannula fixation, with a low profile and small footprint compared to commercially available cannulas. CONCLUSIONS: Editable parametric and stl files for reproducing the cannulas presented in this manuscript are included. The method described in this paper is accessible to most laboratories, enabling near-perfect standardization in length combined with a high level of customizability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalCannulaMice, Inbred C57BLAnimalsNeuronsRatsMiceBiocompatible MaterialsCells, CulturedEquipment DesignPlastics

Stichwörter der Autor:innen

Additive manufacturingBiocompatibilityDrug deliveryGuide cannulasIntracerebroventricular administration

Substanzen

Biocompatible MaterialsPlastics

Autor:innen und Institutionen

  • Research Center of Neurology, Volokolamskoye Shosse 80, Moscow 125367, Russia; Biological Department, Saint Petersburg State University, Universitetskaya Emb. 7/9, St. Petersburg 199034, Russia. Electronic address: st05…
  • Research Center of Neurology, Volokolamskoye Shosse 80, Moscow 125367, Russia; NUST MISIS, Leninskiy Prospekt 4, Moscow 119049, Russia.
  • Biological Department, Saint Petersburg State University, Universitetskaya Emb. 7/9, St. Petersburg 199034, Russia; Institute of Translational Biomedicine, Saint Petersburg State University, Universitetskaya Emb. 7/9, S…
  • Research Center of Neurology, Volokolamskoye Shosse 80, Moscow 125367, Russia; Institute of Translational Biomedicine, Saint Petersburg State University, Universitetskaya Emb. 7/9, St. Petersburg 199034, Russia.

Förderung

  • Russian Science Foundation

Zitieren

APA

Kazanskaya, R. B., Berliand, A. N., Volnova, A. B., & Lopachev, A. V. (2024). Biocompatibility and customizability: Expanding possibilities with 3D printed guide cannulas. Journal of Neuroscience Methods. https://doi.org/10.1016/j.jneumeth.2024.110237

Vancouver

Kazanskaya RB, Berliand AN, Volnova AB, Lopachev AV. Biocompatibility and customizability: Expanding possibilities with 3D printed guide cannulas. Journal of Neuroscience Methods. 2024. doi:10.1016/j.jneumeth.2024.110237

BibTeX
@article{Kazanskaya2024,
  author = {Kazanskaya, Rogneda B and Berliand, Anna N and Volnova, Anna B and Lopachev, Alexander V},
  title = {Biocompatibility and customizability: Expanding possibilities with 3D printed guide cannulas},
  journal = {Journal of Neuroscience Methods},
  year = {2024},
  doi = {10.1016/j.jneumeth.2024.110237}
}
Kostenlos starten →