EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression

Esmaeil Shahryari, Maria Cecilia Poletti, Dalibor Preisler, Petr Harcuba, Josef Stráský, Miloš Janeček, Fernando Gustavo Warchomicka

Journal of Materials Research and Technology · 2024-11 · 33 · 7656-7667

DOI: 10.1016/j.jmrt.2024.11.089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Materials Research and Technology, 2024-11. Verfasst von Esmaeil Shahryari und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation, TU Graz, Internationale Beziehungen und Mobilitätsprogramme, Austrian Science Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Near-beta titanium alloys have shown low Young's modulus and good strength, making them excellent implant candidates. However, their processing using thermomechanical routes in single phase beta region results in heterogeneous microstructures due to high content alloying elements and consequent slow diffusion-controlled processes such as dynamic recovery. This study investigates the deformation behaviour of a Ti-15Mo alloy through hot compression experiments using a Gleeble 3800 device in the single beta domain at strain rates from 0.01 s-1 to 10 s-1, reaching final strains of 0.50 and 0.85 followed by immediate water quench. The findings show that the material presents a low strain rate sensitivity. The flow curves show significant strain hardening before reaching a steady-state regime, particularly at high strain rates. The strain hardening exponent calculations support the effect of molybdenum on retarding softening mechanisms such as dynamic recovery. Electron backscatter diffraction (EBSD) measurements of deformed samples revealed that dynamic recovery is the primary restoration mechanism, with continuous and geometric dynamic recrystallisation evidence. Due to the slow restoration process, we observe the subgrain formation for different deformation parameters. Therefore, we introduced an EBSD-based method to quantify dynamic recovery and subgrain size. We concluded that dynamic recovery and dynamic recrystallisation decrease as the strain rate increases with minimal variation at higher strain rates.

Förderung

  • Czech Science Foundation
  • TU Graz, Internationale Beziehungen und Mobilitätsprogramme
  • Austrian Science Fund

Zitieren

APA

Shahryari, E., Poletti, M. C., Preisler, D., Harcuba, P., Stráský, J., Janeček, M., & Warchomicka, F. G. (2024). Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression. Journal of Materials Research and Technology, 33, 7656-7667. https://doi.org/10.1016/j.jmrt.2024.11.089

Vancouver

Shahryari E, Poletti MC, Preisler D, Harcuba P, Stráský J, Janeček M, et al. Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression. Journal of Materials Research and Technology. 2024;33:7656-7667. doi:10.1016/j.jmrt.2024.11.089

BibTeX
@article{Shahryari2024,
  author = {Shahryari, Esmaeil and Poletti, Maria Cecilia and Preisler, Dalibor and Harcuba, Petr and Stráský, Josef and Janeček, Miloš and Warchomicka, Fernando Gustavo},
  title = {Heterogeneous dynamic restoration of Ti–15Mo alloy during hot compression},
  journal = {Journal of Materials Research and Technology},
  year = {2024},
  volume = {33},
  pages = {7656--7667},
  doi = {10.1016/j.jmrt.2024.11.089}
}
Kostenlos starten →